08410 Entrances and Storefronts

Swing Entrances

• Heights vary to 10 feet; widths range from approximately 3 to 4 feet
• Door frame face widths range to a maximum of 4" (101.6), while depths range to 6" (152.4)
• Door operation is single or double acting with maximum security locks or Touch Bar Panics standard
• Architect's Classic one inch round, bent bar push/pull hardware is available in various finishes and sizes
• Infills range from under 1/4 (6.4) to more than 1" (25.4)

190 Narrow Stile Entrance

• Is engineered for moderate traffic in applications such as stores, offices and apartment buildings
• Vertical stile measures 2-1/8" (54); top rail 2-1/4" (57.2) and bottom rail 3-7/8" (98.4)
• Results in a slim look that meets virtually all construction requirements

• Provides extra strength for applications such as schools, institutions and other high traffic applications
• Vertical stiles and top rails measure 3-1/2" (88.9)
• Bottom rail measures 6-1/2" (165.1) for extra durability

• Creates a monumental visual statement for applications such as banks, libraries and public buildings
• Vertical stiles and top rail are 5" (127); bottom rail measures 6-1/2" (165.1)
• Results in superior strength for buildings experiencing heavy traffic conditions

350 Heavy Wall^™ Entrances
Designed for durability in heavy traffic areas

• Medium Stile Door designed for high traffic applications such as schools, universities and office buildings 
• Door and frame have 3/16" (4.8) walls throughout for additional durability and strength 
• The door is 2" (50.8) deep with 3-1/2" (88.9) vertical stiles and 6-1/2" (165.1) bottom rail 
• Incorporates Kawneer's standard Dual Moment welded corner design 
• Accepts glazing infills from 1/4" to 1" (6.4 to 25.4)

350/500 Tuffline^® Entrances
Heavy duty and engineered to withstand high traffic in schools, universities, malls and supermarkets

• Constructed for unequaled strength with 3/16" (4.8) walls throughout door and frame 
• 3-1/2" (88.9) wide stiles (350 Tuffline®) and 5" (127) wide stiles (500 Tuffline®) with 2" (50.8) deep door sections on both 
• Door heights range from 7 to 9 feet; widths from 3 to 4 feet 
• Door frame face width is 2" (50.8) and depth is 4-1/2" (114.3)
• Accepts glazing infills from 1/4" to 1" (6.4 to 25.4) 
• Complete package of door, door frame and hardware
• Kawneer's Dual Moment welded corner construction resists both the lever arm and torsion forces all doors experience

Entara^® and Entara^® XD Entrances
A complete package of door, frame and hardware designed for high-abuse traffic areas and protection from forced entry or vandalism

• Offers multiple design options
• Three stile widths: 3" (76.2), 4-1/2" (114.3),6" (152.4)Mounted center pivot, offset pivot or butt hinges
• Fully integrated frames are available with or without transoms
• Basic door stiles and rails for both entrances measure 2-1/4" (57.2) in depth, with 3/16" (4.8)wall thickness for greater strength and rigidity
• Doors are mechanically joined and welded
• Entara^® 450 Framing is 1-3/4" x 4-1/2" (44.5 x 114.3), with 1/4" (6.4)thick side walls for direct attachment of high-stress hardware
• Entara^® XD is a single-acting, outswing door and frame designed for maximum protection from forced entry and vandalism
• The Kawneer Panic Guard^® mechanism is optional
• Entara^®and Entara^® XD accept glazing infills from under 1/4" to 1" (6.4 to 25.4)

Flushline^® Entrances
Single-acting Flushline Doors provide durability and strong design aesthetics for applications such as schools and manufacturing facilities

• Offers a flush appearance with a face sheet of fiberglass-reinforced polyester (FRP) or aluminum in a variety of colors and captured on four sides by integral, extruded reglets
• Features Kawneer Dual Moment welded corners
• Additional strength is achieved by the polyurethane foam core that interlocks with the aluminum and creates an extremely stable, durable entrance door
• Door vision lites are available in aluminum or gasket framing with 1/4" (6.4)or 1" (25.4) infills
• The aluminum provides a flush appearance while the gasket achieves an architectural look through radiused corners
• Hardware options allow customization
• Heights range from less than 7 feet to a maximum of 12 feet
• Widths vary from approximately 3 to 4 feet
• Paneline^® Panic Device with minimal 1-1/8" (28.6) projection is available

260/360/560 Insulclad^® Thermal Entrances
Narrow, medium and wide stile entrances, providing thermal efficiency for the entire building facade

• Both the door and frame are thermally broken
• Complete package of door, fully integrated door frame (with or without transoms) and integrated hardware; stile face widths of 2-1/8" (54), 3-1/2" (88.9)and 5" (127)
• Dual Moment corner construction, hinges and hardware choices
• Engineered for use with Kawneer's 451T Framing System and 1600 Wall Systems® products
• Fully glazed entrance is single-acting and mounted on offset pivots or butt hinges
• Accepts glazing infill of 1"(25.4)
• Door heights range from approximately 7 to 8 feet, with widths from 3 to 3-1/2 feet
• Insulclad^® 260 Thermal entrance tested to; U-factor: 0.67, CRF: 52

2000T Terrace Doors
High Performance French Doors Designed for use in Condominiums, Lofts, Apartments and Hotels

• Commercial class and grade for Pairs of doors
• Heavy Commercial class and grade for Single doors
• Inswing or Outswing
• 3-3/4" (95.3) wide, 2-1/4" (57.2) deep door rails and stiles
• Mitered door corners
• Heavy duty internal corner clips
• 1" x 4" (25.4 x 101.6) door frame
• 0.125 nominal wall thickness, door and frame
• 1-1/2 pair of 3-1/2" x 4-1/2" (88.9 x 114.3) mortised aluminum butt hinges with non-removable stainless steel hinge pins
• Continuous double rows of thermal barrier
• Double rows of weather seals
• Stainless steel multipoint locking including latch lock and deadbolt with shoot-bolts as required
• Solid brass lever handle selection in 8 finishes
• Removable construction handle for use during construction
• Applied and true muntins
• Removable tubular interlocking glazing beads
• Accommodates 1/4" (6.4), 5/16" (7.9), 3/8" (9.5), 1/2" (12.7), 9/16" (14.3), 5/8" (15.9), 3/4" (19.1), 7/8" (22.2), 1" (25.4) and 1-1/8" (28.6) infill
• Wet/Dry glazing method
• Factory glazed, shipped with door hung in frame
• Kawneer standard finishes
• Two color option
• Integral astragal in the inactive leaf 

350 IR Entrances
Standard Entrances that Provide the Extra Strength Where Code Requirements include Windborne Debris Protection

• Single or Pair of Doors. 1-3/4" (44.5) deep with 3-1/2" (88.9) vertical stiles and top rails and 6-1/2" (165.1) bottom rails. 7-1/2" (190.5) and 10" (254) bottom rail option available.
• Square glass stops with an interior silicone seal for 9/16" (14.3), 7/16" (11.1) and 1/4" (6.4) impact resistant glazing
• Single acting with offset pivots, butt hinges or continuous geared hinge.
• M.S. 3-point locks, M.S. locks with manual flushbolts or panic hardware options.
• Adjustable astragal and bottom rail sweep. Sealair® bulb polymeric weather stripping in door frames.
• Tested to meet current codes requiring protection of openings in wind borne debris regions.
• Dual Moment, limited lifetime warranty corner construction - 16 welds per door.
• Kawneer standard and custom finishes available.
• Can be incorporated within IR 500 and IR 501 framing or non-transom/non-sidelite Trifab® VG 450 (Center) frames and 1600 Wall sub-frames.

Storefront Framing

• Trifab 400 has 1-3/4" x 4" (44.5 x 101.6) frame members accept 1/4" (6.4) infills 
• May be flush glazed from the inside or outside 
• Choice of screw spline, shear block or stick construction

Trifab^® VG (VersaGlaze^®) 450 - [standard 1-3/4” sightline]
Built on the proven and successful Trifab platform, Trifab VG offers design versatility with unmatched fabrication flexibility.

• Hurricane Impact tested on Shutter Application Only
• Trifab^® VG 450 is 4-1/2" (114.3) deep with a 1-3/4" (44.5) sightline
• Front, Center, Back or Multi-Plane glass applications
• Flush glazed from either the inside or outside
• Screw Spline, Shear Block, Stick or Type-B fabrication
• SSG / Weatherseal option
• 1/8" (3.2), 1/4" (6.4)or 3/8" (9.5)infill options
• Painted finishes in standard and custom choices
• High performance interlocking flashing
• Storefront, Ribbon Window or Punched Openings
• Single-span
• Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated
• Kawneer Sealair^® windows or GLASSvent^™ are easily incorporated

Trifab^® VG (VersaGlaze^®) 450 – [optional 2” sightline]
Built on the proven and successful Trifab platform, Trifab VG offers design versatility with unmatched fabrication flexibility.

• Economical                                 
• 2" (50.8) sightline
• 2-1/4" (57.2) frame depth (Veneer) and 4-1/2" (114.3) frame depth (Captured)
• Front glass plane
• Flush glazed from either the Inside or Outside (Veneer is outside glazed)
• Stick fabrication
• SSG / Weatherseal option
• 1/8" (3.2), 1/4" (6.4) or 3/8" (9.5) infill options
• Painted finishes in standard and custom choices
• Storefront, Ribbon window or Punched openings
• Low to Mid-rise
• Single-Span
• Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be included

Trifab^® VG (VersaGlaze^®) 451 / 451T Framing Systems
Built on the proven and successful Trifab platform, Trifab VG offers design versatility with unmatched fabrication flexibility

• Hurricane Impact tested on Shutter Application Only
• Trifab^® VG 451/451T is 4-1/2" (114.3) deep with a 2" (50.8) sightline
• Front, Center, Back or Multi-Plane glass applications
• Flush glazed from either the inside or outside
• Screw Spline, Shear Block, Stick or Type-B fabrication
• SSG / Weatherseal option
• ISOLOCK^® lanced and debridged thermal break option with Trifab^® VG 451T
• Infill options up to 1-1/8" (28.6) thickness
• Painted finishes in standard and custom choices
• High performance interlocking flashing
• Acoustical rating per AAMA 1801 and ASTM E 1425
• Project specific U-factors (See Thermal Charts) 
• Storefront, Ribbon Window or Punched Openings
• Single-span
• Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated
• Kawneer Sealair^® windows or GLASSvent™ are easily incorporated

EnCORE^® Thermal Framing System
The two-piece, face-and-gutter system that offers thermal economy with numerous design options.

• Economical
• 1-3/4" (44.5) sightline with a 3-9/16" (90.5), 4-1/2" (114.3) or 6" (152.4) depth
• Front or Center (4-1/2") glass applications
• Outside glazed
• Screw Spline, Shear Block or Type-B fabrication
• SSG option
• Infill options up to 1-1/8" (28.6)
• Thermal break via polymer glazing clip
• Painted finishes in 42 standard choices and unlimited custom choices 
  Two color capability
• 1-1/4" (31.8) perimeter sightline
• Project specific U-factors (See Thermal Charts)

IR 500/501 Framing
Framing System Solutions for Hurricane Resistance

• IR 500 is 5" deep and has a 2-1/2" (63.5) sightline
• IR 501 is 5" (127) deep and has a typical 2-1/2" (63.5) sightline and a 2-3/4" (69.9) sightline at intermediate vertical mullions
• Screw spline fabrication
• Center glazed
• Outside glazed with an internal silicone seal
• IR 500 glazing options are 9/16" (14.3), 5/8" (15.9) impact resistant and 1/4" (6.4) non-impact
• IR 501 glazing options are 1-5/16" (33.3) insulated impact resistant and 1" (25.4) non-impact
• Integrates 350 IR Medium Stile single or pairs of Entrances
• Tested to meet current codes requiring protection of openings in wind borne debris regions.