810 Traditional Fence / Parapet Wall System
EverLoc's™ Fence/Parapet systems are great for many applications including sitting walls, courtyards, privacy fences, patios, etc. One popular application is a parapet atop a retaining wall. Parapets can be designed and installed with the retaining wall itself eliminating unsightly guardrails or handrails. The Fence/Parapet system accommodates multiple heights insuring your barrier provides the protection you need around parking lots and other areas. The same versatile patterns found in EverLoc™ retaining walls are available for the Fence/Parapet systems. A complete line of accessories allow EverLoc™ Fence/Parapet to adapt to your specific needs. Always consult a Civil Engineer before designing or installing parapets intended for protective barriers! For retaining walls requiring engineered drawings, parapets must be included in the initial retaining wall design to allow for proper load requirements. For your protection and to assure compliance with state and local codes, all walls to be built 4 feet or taller must be engineered by a qualified engineer. The cost of this service is very nominal and also gives you a very accurate estimate of the cost of your planned wall. Ask your dealer for details. 
810 Traditional Fence
The 810 Traditional Fence is a 9" deep, one square foot unit with the same front face & locking features as the popular 810 Traditional wall unit. It is used in the 810 Traditional and 810 Traditional/Full Fence/Parapet systems.
850 Half
The 850 Half is a .5 square foot unit. It can be used by itself for constructing retaining walls or as an accessory for other EverLoc™ styles. The 850 Half is perfect when starting a walls against vertical structures to maintain bond. It can, also, be used in an 810 Traditional or 810 Traditional/Full wall for bond advancement through radii.
Corner (L/R) with 833 Utility
EverLoc™ Corners have an integral locking mechanism assuring ninety degree alignment and proper setback. Corners are equipped with radius edges giving them a finished appearance. These features are especially helpful when building steps! A utility piece is used beside each corner to maintain proper bond.
Fence/Parapet Cap
The Fence Cap is the most recognizable of the Fence/Parapet components. The cap provides a majestic, bold look for the Fence/Parapet with its arched top and smooth sides. The cap, also, provides another function by connecting the front and back sections of the Fence/Parapet.
Column Cap
The Column Cap is a nice addition to the Fence/Parapet system giving columns that finished look. Three pieces are required to cap a standard EverLoc™ Column. Having the same basic features as the fence cap, with its arched top and smooth faces, the Column Cap adds the finishing touch!
EverLoc™ Retaining Walls |