810 Full Retaining Walls
EverLoc™ Retaining Walls are also available without the dress joint! The Full Series offers a more conventional appearance while maintaining the key features EverLoc™ is known for. This unit can be used by itself or mixed with the Traditional Series to increase the randomness of your EverLoc™ Wall. For your protection and to assure compliance with state and local codes, all walls to be built 4 feet or taller must be engineered by a qualified engineer. The cost of this service is very nominal and also gives you a very accurate estimate of the cost of your planned wall. Ask your dealer for details. 
810 Full
Corner (L/R) with 833 Utility
EverLoc™ Corners have an integral locking mechanism assuring ninety degree alignment and proper setback. Corners are equipped with radius edges giving them a finished appearance. These features are especially helpful when building steps! A utility piece is used beside each corner to maintain proper bond.
Cap
Caps are used to cap retaining walls and for stair treads. A groove in the bottom of the cap locks it onto the lugs of the SRW unit beneath it. The split surface of the cap aligns vertically with the split surface of the SRW unit it is resting on. A beveled top edge gives the cap a finishing touch, and provides a smooth transition at the front edge of stair treads.
833 Utility
The 833 Utility serves two purposes. First, it is used beside each corner to establish running bond. Secondly, it can be inserted in a radius to advance bond.
850 Half
The 850 Half is a .5 square foot unit. It can be used by itself for constructing retaining walls or as an accessory for other EverLoc™ styles. The 850 Half is perfect when starting a walls against vertical structures to maintain bond. It can, also, be used in an 810 Traditional or 810 Traditional/Full wall for bond advancement through radii.
EverLoc™ Retaining Walls |