Pivot Hinges & Auxillary Products

Double Acting Pivots [for Doors 1-3/8" (35) or 1-3/4" (44)]

EP5-J Center Hinge Pivot Set
For use on average frequency double acting interior doors in schools, hospitals, institutions, and other public buildings. Header pivot solid brass material. Top door pivot has an oil impregnated porous metal bearing and rounded corners. Bottom jamb bracket solid brass material with 1/4" (6) vertical adjustment. Bottom door pivot has an anti-friction bearing unit and rounded corners. Pivot point 1-1/4" (32) from jamb. Highly polished and then naturally finished or finely plated in 3, 4, 10, 10B, 26, or 26D. Full mortise only on jambs and door.

4007RB — 4007MRB Double Acting Gate Pivot Hinge Set
For use on wood and metal gates. 4007RB is applied to the surface of the gate and the box is applied to the bottom surface of the gate. Socket is mortised into the top of the gate.

4007MRB — box is mortised into the bottom of the gate.

Number	Minimum Clearance Under Gate In. (mm)	Thickness of Gate or Handrail In. (mm)	Width of Jamb Attachment In. (mm)
4007MRB	2-3/8 (60)	1-1/8 to 2-1/2 (29 to 64)	1-1/2 (38)
4007RB	4 (102)	1-1/8 to 2-1/2 (29 to 64)	1-1/2 (38)

3001 Double Acting Horizontal Spring Pivot Hinge
The 90 degree hold open feature, hardened steel roller bearings, and slotted screws permit easy alignment. Adjustable tension, nylon top pivot, and
socket. Furnished in painted or plated finishes. To order with jamb attaching plate (for concrete or tile floor) prefix J to 3001 number. For light weight gates and doors.

Emergency Door Stop

For use with McKINNEY EP-5 pivots in schools, hospitals, institutions, and other public buildings. Used for converting double acting doors, hung on center pivots, to single acting doors.

• Furnished in bronze material with rubber bumper insert. Spring action stop with fingertip release using a pullman-type latch.
  • A touch of the finger to the face of the lever releases the latch
  • A second touch of the lever returns the latch to its original position
  • Emergency release allows door to swing open in opposite direction, permitting access to any obstruction in normal path of door
• Highly polished, then naturally finished or finely plated
• Mortise only on frame. Templates are available on McKINNEY’s Web site at www.mckinneyhinge.com or upon request

Double Lipped Strike

• Made from .095 gauge brass
• Polished and plated
• Available in center hung or offset
• For frame size 5-1/4" (133) and 6-3/4" (171)
• Supplied with six each 1/2" x 8" machine screws
• Other sizes available upon request
• Templates are available on McKINNEY’s Web site at www.mckinneyhinge.com