Full and Half Mortise Hinges
Offers the most security in a standard hinge. The bearing hinges have a stainless
steel pin and anti-friction bushing in the door leaf, which provides additional
protection against vertical and lateral wear.
- Plain bearing hinges have an anti-friction component inserted between the
two barrels
- The slim barrel Moderne two knuckle hinge is available in steel and non-ferrous
base
- Standard and heavy weight
- Pins in all bearing hinges are stainless steel
- Pins in plain bearing hinges are steel; stainless steel pins are available
- Standard hinges are packed with all machine by half wood screws
- By design, pins are non-rising, non-removable and tamper protected by a
flush, non-removable cap at the end of the barrel. A door can not be removed
when in the closed position, thus affording maximum security. Intermediate
hinges can be ordered opposite hand and installed upside down, to inhibit
removal of the door in an open position.
- Available non-removable door (NRD) hinges have a dowel in the barrel. One
NRD hinge can be ordered per set
- Two knuckle hinges are handed
- Adjustable through factory designed spacers to accommodate slightly offset
door and frame when prep is slightly above or below opposite prep location
| |
Plain Bearing |
Standard Weight Bearing |
Heavy Weight Bearing
|
| Type |
Size, In. (mm) |
Gauge |
Steel |
Gauge |
Bronze/Brass/
Stainless Steel |
Steel |
Gauge |
Bronze/Brass/
Stainless Steel |
Steel |
| 2
Knuckle |
3-1/2 x 3-1/2 (89 x 89) |
123* |
|
.123* |
|
|
— |
|
|
| 4 x 4 (102 x 102) |
130
|
|
.130 |
|
|
— |
|
|
| 4-1/2 x 4 (114 x 102) |
134 |
|
.134 |
|
|
.180 |
|
|
| 4-1/2 x 4-1/2 (114 x 114) |
134
|
T2731 |
.134 |
TA3331 |
TA2731 |
.180 |
TA3350 |
TA3750 |
| 5 x 4 (127 x 102) |
146
|
|
.146 |
|
|
.190 |
|
|
| 5 x 4-1/2 (127 x 114) |
146 |
|
.146 |
|
|
.190 |
|
|
| 5 x 5 (127 x 127) |
146 |
|
.146 |
|
|
.190 |
|
|
| |
Plain Bearing |
Standard Weight Bearing |
Heavy Weight Bearing
|
| Type |
Size, In. (mm) |
Gauge |
Steel |
Gauge |
Bronze/Brass/
Stainless Steel |
Steel |
Gauge |
Bronze/Brass/
Stainless Steel |
Steel |
|
2
Knuckle |
3-1/2 x 3-1/2 (89 x 89) |
123* |
|
.123* |
|
|
— |
|
|
| 4 x 4 (102 x 102) |
130
|
|
.130 |
|
|
— |
|
|
| 4-1/2 x 4 (114 x 102) |
134 |
|
.134 |
|
|
.180 |
|
|
| 4-1/2 x 4-1/2 (114 x 114) |
134
|
T2731 |
.134 |
TA3331 |
TA2731 |
.180 |
TA3350 |
TA3750 |
| 5 x 4 (127 x 102) |
146
|
|
.146 |
|
|
.190 |
|
|
| 5 x 4-1/2 (127 x 114) |
146 |
|
.146 |
|
|
.190 |
|
|
| 5 x 5 (127 x 127) |
146 |
|
.146 |
|
|
.190 |
|
|
Bearing hinges have concealed vertical and lateral thrust twin anti-friction
type bearings at both joints.
- Pin stems in all non-ferrous bearing hinges are stainless steel
- Pins in all ferrous hinges are steel
- Pins in all hinges are non-rising type
- Standard hinges are packed with all machine by all wood screws
- Available in 3K-ET style, furnished with button tips (same pin and plug
as 5 knuckle hinge)
| |
Plain Bearing |
Standard Weight Bearing |
Heavy Weight Bearing
|
| Type |
Size, In. (mm) |
Gauge |
Steel |
Gauge |
Bronze/Brass/
Stainless |
Steel |
Gauge |
Bronze/Brass/
Stainless Steel |
Steel |
| 3
Knuckle |
3-1/2 x 3-1/2 (89 x 89) |
— |
|
.123* |
|
|
— |
|
|
| 4 x 4 (102 x 102) |
.130
|
|
.130 |
|
|
— |
|
|
| 4-1/2 x 4 (114 x 102) |
.134 |
|
.134 |
|
|
.180 |
|
|
| 4-1/2 x 4-1/2 (114 x 114) |
.134
|
T714 |
.134 |
TA314 |
TA2731 |
.180 |
TA386 |
TA786 |
| 5 x 4 (127 x 102) |
.146
|
|
.146 |
|
|
.190 |
|
|
| 5 x 4-1/2 (127 x 114) |
.146 |
|
.146 |
|
|
.190 |
|
|
| 5 x 5 (127 x 127) |
.146 |
|
.146 |
|
|
.190 |
|
|
| 8 X 6 (203 X 152) |
— |
|
— |
|
|
.225*+ |
|
|
| 8 X 8 (203 X 203) |
— |
|
— |
|
|
.225*+ |
|
|
| When door is beveled on hinge side
specify handing required |
|
T5714 |
|
TA5314 |
TA5714 |
|
TA5386 |
TA5786 |
Bearing hinges are furnished with an oil impregnated (TA) bearing on hinges
up to 5" high.
- Pin stems in all non-ferrous bearing hinges are stainless steel
- Pins in all ferrous hinges are steel
- Pins in all hinges are non-rising type
- Standard hinges are packed with all machine by all wood screws
- Concealed bearings (TCA are available)
- Ball bearings (TB are an available option)
| |
Plain Bearing |
Standard Weight Bearing |
Heavy Weight Bearing
|
| Type |
Size, In. (mm) |
Gauge |
Steel |
Gauge |
Bronze/Brass/
Stainless Steel |
Steel |
Gauge |
Bronze/Brass/
Stainless Steel |
Steel |
| 5
Knuckle |
3-1/2 x 3-1/2 (89 x 89) |
.123* |
|
.123* |
|
|
— |
|
|
| 4 x 4 (102 x 102) |
.130
|
|
.130 |
|
|
— |
|
|
| 4-1/2 x 4 (114 x 102) |
.130 |
T2714 |
.134 |
TA-TB3313 |
TA-TB2714 |
.180 |
|
|
| 4-1/2 x 4-1/2 (114 x 114) |
.134
|
MP79** |
.134 |
TA-TB2314 |
MPB79** |
.180 |
T4A-T4B3386 |
T4AT4B3786 |
| 5 x 4-1/2 (127 x 114) |
.146 |
|
.146 |
|
|
.190 |
|
|
| 5 x 5 (127 x 127) |
.146 |
|
.146 |
|
|
.190 |
|
|
| 6 x 6 (152 x 152) |
.160*+ |
|
.160*+ |
|
|
.203* |
|
|
| 8 X 6 (203 X 152) |
— |
|
— |
|
|
.203*^ |
|
|
| 8 X 8 (203 X 203) |
— |
|
— |
|
|
.203*^ |
|
|
| When door is beveled on hinge side,
specify handing required |
|
T4714 |
|
TA-TB4314 |
TA-TB4714 |
|
T4A-T4B4386 |
T4A-T4B4786 |
- For use when necessary for door to open around a large reveal
| |
Standard Weight Bearing |
Heavy Weight Bearing
|
| Type |
Size, In. (mm) |
Gauge |
Door Thickness
In. (mm) |
Steel |
Bronze/Brass/
Stainless Steel |
Gauge |
Door Thickness
In. (mm) |
Steel |
| 5
Knuckle |
4-1/2 x 6 (114 x 152) |
.134 |
1-3/4 (44) |
|
|
.180 |
1-3/4 (44) |
|
| 4-1/2 x 7 (114 x 178) |
.134
|
1-3/4 (44) |
|
|
.180 |
1-3/4 (44) |
|
| 4-1/2 x 8 (114 x 203) |
.134 |
1-3/4 (44) |
TA-TB2798 |
TA-TB2398 |
.180 |
1-3/4 (44) |
T4A-T4B3786 |
| 5 x 7 (127 x 178) |
.146
|
1-3/4 (44) |
|
|
.190 |
1-3/4 (44) |
|
| 5 x 8 (127 x 203) |
.146 |
1-3/4 (44) |
|
|
.190 |
1-3/4 (44) |
|
When door is beveled on hinge
side, specify handing required |
TA-TB4798 |
TA-TB4398 |
|
|
T4A-T4B3786 |
- Hinge allows maximum clearance for passage of beds, tables and other equipment
through doorway for barrier free access
| |
Standard Weight Bearing |
Heavy Weight Bearing
|
| Type |
Size
In. (mm) |
Gauge |
Door Thickness
In. (mm) |
Steel |
Stainless Steel |
Size, In. (mm) |
Gauge |
Door Thickness
In. (mm) |
Steel |
Stainless
Steel |
|
3
Knuckle |
— |
— |
— |
— |
— |
5 (127) |
.190 |
1-3/4 (44) |
TA795 |
— |
| When door is beveled on hinge side, specify handing
required |
— |
— |
— |
TA5795 |
— |
5
Knuckle |
4-1/2 (114) |
.134
|
1-3/4 (44) |
TA-TB2895 |
TA-TB2395 |
4-1/2 (114)
5 (127) |
.190
.190 |
1-3/4 (44)
1-3/4 (44) |
T4A-T4B3795 |
T4A-T4B3395 |
| When door is beveled on hinge side, specify handing
required |
TA-TB4895 |
TA-TB4395 |
|
|
|
T4A-T4B4795 |
T4A-T4B4395 |
Half Mortise
McKINNEY Products Company
225 Episcopal Road
Berlin, CT 06037
Toll-Free: (800) 346-7707
Fax: (800) 541-1073
Email: customerservice@mckinneyhinge.com
Web site: www.mckinneyhinge.com
|