Snap Trak – Metal Stud Framing Deflection Track System

Snap Trak took the ease of deflection clip systems and combined them with inexpensive track to create the most economical deflection track system available. Snap Trak easily replaces double track, slotted track and clip systems used in interior applications. Snap Trak has been shown to be especially cost effective on corridors and demising walls.

The pre-punched clips provide an automatic layout at 16" and 24" o.c. and eliminate the need for screws or components to achieve positive, mechanical attachment. The labor intensive installation and removal of temporary screws common in friction fit assemblies is also eliminated.

• Provides 1" of deflection in a non-rated assembly
• Provides up to 5/8" deflection in a fire rated assembly. Movement is dependent on type of fire caulk or fire spray used.
• Up to 2" of deflection is possible by simply extending the vertical legs of Snap Trak

• Snap Trak meets the requirements of all standard building codes; UBC, BOCA, SBCCI and the new IBC code
• Approved for use with most fire caulk and fire spray manufacturers
• UL approved for use with multiple seismic (Class III) tested head-of-wall dynamic joints

• Fabricated in 24, 20 and 16 gauge galvanized steel
• Manufactured in 10' lengths
• Available in the following stud sizes: 1-5/8", 2-1/2", 3-1/2", 3-5/8", 4", 6" and 8"

• Snap Trak is a specially designed deep leg track with clips punched into its sides spaced 8" o.c.
• Clips engage inside flange of a steel stud when stud is "snapped" in place
• Automatic layout at 16" or 24" o.c.
• Positive attachment is achieved without the need for screws
• Off layout studs are easily handled with Posi Clips (See Details)
• Snap Trak can also be used as a floor runner

UL Listings
Snap Track is listed as an alternative framing member for the following UL Head-of-Wall listings arranged by test sponsor.