EPIC METALS CORPORATION

Specialty Deck Systems are available from Epic Metals to enhance the appearance and expand the purpose of a metal deck system. These systems make it unnecessary for a designer to limit the form and function of a building to whatever capabilities basic floor and roof decks possess. The information below is intended to introduce you to Epic Specialty Deck Systems; and to challenge you to incorporate into your next building a product that exceeds ordinary metal deck systems. Please contact Epic Metals for additional information.

Epic has been a manufacturer of quality floor and roof deck products since 1968. Today, our product line features Specialty Deck Systems including:

EPICORE
®

Dovetail shaped ribs set this deck section apart from ordinary profiles.

WIDECK

EPIC WIDECK
® LONG-SPAN SYSTEMS improvements are the first for long-span metal deck systems since this type of construction was introduced in the 1950’s.

SUPER WIDECK

EPIC METALS SUPER WIDECK
provides the first steel roof and floor system to open the truss or girder spacing in excess of 35 feet.

EPICORE
® COMPOSITE FLOOR SYSTEM

Some of the advantages created by the dovetail shaped ribs of Epicore Composite Floor Deck include:

• AN INTEGRAL HANGING SYSTEM
of great flexibility (continuous slots 6.125 inches on center) and load capacity (up to 1000 lbs. per hanger).

• GREAT STRUCTURAL STRENGTH
that permits higher allowable superimposed loads and longer clear spans compared to ordinary composite floor slabs.

• A PLANK-LIKE BOTTOM SURFACE
that provides an attractive "linear" appearance without the use of a suspended ceiling.

Fire Ratings (unprotected). For any given slab depth, U.L. fire resistance ratings for EPICORE deck exceed those for any 1-1/2, 2 or 3-inch deck. See U.L. Design Numbers D904 and D917.

EPIC METALS CORPORATION
Eleven Talbot Avenue
Rankin, PA 15104
Tel: (412) 351-3913
Fax: (412) 351-2018
E-mail: info@epicmetals.com
Web site: http://www.epicmetals.com