Perimeter Systems
143 Charlotte Avenue
Suite 104
Sanford, NC 27330
Tel: (919) 775-7353
Toll free: (800) 334-9823
Fax: (919) 775-5652
Email: persys@saf.com
Web site: www.saf.com/persys
Press-Loc is designed to accommodate the rigid performance criteria of today’s
advanced roofing systems. It doesn’t matter if your roof membrane is E.P.D.M.,
Thermoplastic, Modified Bitumen, or a Built-up Roof, Press-Loc fits them all.
Press-Loc allows you to install your metal edging to be flashed in accordance
with your membrane manufacturer’s specifications. The secure bar design
fully encapsulates your membrane ensuring a watertight and leak-proof edge.
And, if you’re using a raised tapered roof edge and minimum leak- age
is not a problem, simply omit your metal edging…it’s your choice.
Press-Loc’s unique and simple design makes installation fast and economical,
while giving you a leak-proof gravel stop edge that is extremely resistant to
wind uplift. Simply face screw (screws provided) Press-Loc’s secure bar
into your roof’s edge, place tension clips at 24", and snap on Press-
Loc’s fascia…it’s that simple.
Please click the CAD Library button to view available
Gravel Stop profiles, options, and sizes.
Since its introduction in 1980, Press-Loc Coping has been installed throughout
the United States. During these twenty five years, we are proud to state that
we have never had a reported failure for any reason – from the products’
finish, to its holding power under hurricane conditions. Press-Loc coping provides
an unblemished record of durability. Press-Loc Coping has been popular with
both architects and contractors. Its concealed compression cleats eliminate
exposed fasteners and make installation fast and easy. Manufactured from aluminum,
the coping is available in a variety of finishes, colors, and metal thickness.
Options include brick ledge caps, extenders, welded miters, and end caps. Copings
are available in a variety of finishes and 56 EZ Mix colors.
Please click the CAD Library button to view available
Press-Loc Coping
profiles and sizes.
- 0.040” Aluminum (default)
- 0.050” Aluminum
- 0.063” Aluminum
- 0.080” Aluminum
- 0.090” Aluminum
- EZ Mix Kynar (default)
- Custom Kynar
- Clear Anodized
- Integral Color Anodized
- Mill Finish
Other Options Available
Since its introduction in 1980, Press-Loc Coping has been installed throughout
the United States. During these twenty five years, we are proud to state that
we have never had a reported failure for any reason – from the products’
finish, to its holding power under hurricane conditions. Press-Loc coping provides
an unblemished record of durability. Press-Loc Coping has been popular with both
architects and contractors. Its concealed compression cleats eliminate exposed
fasteners and make installation fast and easy. Manufactured from aluminum, the
coping is available in a variety of finishes, colors, and metal thickness. Options
include brick ledge caps, extenders, welded miters, and end caps. Copings are
available in a variety of finishes and 56 EZ Mix colors.
Please click the CAD Library button to view available
Press-Loc Coping profiles and sizes.
- 0.040” Aluminum (default)
- 0.050” Aluminum
- 0.063” Aluminum
- 0.080” Aluminum
- 0.090” Aluminum
- EZ Mix Kynar (default)
- Custom Kynar
- Clear Anodized
- Integral Color Anodized
- Mill Finish
Other Options Available
|