Johns Manville Roofing Systems -ENRGY Anchor - Fasteners and Plates

DOWNLOADS

ENRGY™ Anchor is a lightweight, roof-top integrated, photovoltaic (PV)-mounting solution consisting of a Galvalume®*-coated steel plate welded to a stainless steel stud, with a JM membrane flashing target. Each assembly includes a leveling washer and membrane separator.


Category: fasteners | hardware | mechanically attached membranes...

MasterFormat: Membrane Roofing



Johns Manville Roofing Systems
717 17th Street
Denver, CO 80217
Tel: (303) 978-2000

sweetsinfo@jm.com

https://www.jm.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


ENRGY Anchor - Fasteners and Plates

ENRGY™ Anchor is a lightweight, roof-top integrated, photovoltaic (PV)-mounting solution consisting of a Galvalume®*-coated steel plate welded to a stainless steel stud, with a JM membrane flashing target. Each assembly includes a leveling washer and membrane separator.

High Wind Rating: Unlike a ballasted system, ENRGY Anchor can be installed on most buildings in high wind zones without adding substantially more weight. The systems can be installed flat and nearly flush to further reduce wind load.

Lightweight: When paired with a racking system and PV modules, installed distributed loads are typically between 2.5 - 4.0 pounds per square foot.

Design Flexibility: The ENRGY Anchor is compatible with most rack-mounted solutions. Whether the PV-mounting solution calls for a ballasted or penetrating attachment, substituting the ENRGY Anchor provides a guarantee included and more roofing friendly solution that saves labor dollars.

Color: Dependent on system

* Galvalume is a registered trademark of BIEC International, Inc. and some of its licensed producers.


See More


Sweetsstakes