J.R. Clancy, Incorporated -Wire Guide Arbors

DOWNLOADS

  • Used in wire guided systems to hold counterweight that balances the batten load.
  • Arbor tops and bottoms are fabricated 1/2" steel plates with 3/8" holes for guide wires located on 15" centers


Category: rigging systems | stage equipment | stages...

MasterFormat: Entertainment and Recreation Equipment | Broadcast, Theater, and Stage Equipment | Rigging Systems and Controls



J.R. Clancy, Incorporated
7041 Interstate Island Road
Syracuse, NY 13209
Tel: (800) 836-1885
Fax: (315) 451-1766

marilynlarsen@jrclancy.com

http://www.jrclancy.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Wire Guide Arbors

  • Used in wire guided systems to hold counterweight that balances the batten load.
  • Arbor tops and bottoms are fabricated 1/2" steel plates with 3/8" holes for guide wires located on 15" centers
  • Arbor tops have 7 gauge steel plates with holes for lift line terminations and bolt and spacer for the hand line termination. Label on top provides safety information and locations for spreader plates.
  • Arbor tops are punched to accept 8 cables.
  • Two 3/4" steel arbor rods have three nuts at top and bottom.
  • Each rod has a retaining collar with a thumbscrew incorporating an easy to grip plastic knob.
  • 12 gauge steel spreader plate every two feet (minimum 2).


See More


Specifications

Ordering Information
Product CodeLength*Capacity + 4" WeightsCapacity + 6" WeightsWt.
007-85X044'50478234 lb
007-85X055'6721,04337 lb
007-85X066'8411,30340 lb
007-85X077'1,0091,56443 lb
007-85X088'1,1771,82546 lb
Sweetsstakes