Foster™ -Foster® CP-240 CHIL-LOCK Asbestos Removal Agent/Post Removal Sealer

DOWNLOADS

CHIL-LOCK Asbestos Removal Agent/ Post Removal Sealer CHIL-LOCK CP-240 is an economic, fire retardant, polymeric water-based asbestos removal agent and post removal sealer. As a post removal sealer, it is designed to mist, lock down, and seal free asbestos fibers and residual asbestos containing mat


Category: asbestos abatement | coatings | finishes...

MasterFormat: Asbestos Remediation | Asbestos Abatement | High-Performance Coatings...


Related Products

Overview


Foster® CP-240 CHIL-LOCK Asbestos Removal Agent/Post Removal Sealer



CHIL-LOCK Asbestos Removal Agent/ Post Removal Sealer CHIL-LOCK CP-240 is an economic, fire retardant, polymeric water-based asbestos removal agent and post removal sealer. As a post removal sealer, it is designed to mist, lock down, and seal free asbestos fibers and residual asbestos containing material (ACM) after removal. It effectively locks the ACM onto cleaned, exposed substrates and polyethylene sheeting within the containment area to prevent any loose fibers from becoming airborne. It adheres to structural steel and surfaces to be reinsulated for service temperature applications up to 250ºF (121ºC). It is also used as a primer on structural surfaces to be fireproofed in respray applications. CP-240 may also be used in a diluted form as an asbestos removal agent to mist and wet ACM for removal purposes in the containment area.

CP-240 asbestos removal agent/post removal sealer is waterbased and contains no harmful solvents. It has no objectionable odor and does not adversely affect workers in the containment area or in areas adjacent to the abatement operations. Application is quick and easy.

CHIL- LOCK contains no asbestos, lead, mercury, or mercury compounds.

LIMITATIONS
Do not store over 100ºF (38ºC). Do not apply below 32ºF (0ºC) or to surfaces operating at, or intended to operate in excess of 250ºF (121ºC). Protect from freezing until dry.

DS CP-240 R0809


COLOR:
Clear

AVERAGE NON-VOLATILE (ASTM D-2369):
10% by weight (undiluted)

AVERAGE WEIGHT/U.S. GALLON (ASTM D-1475):
8.4 lbs. (1.01 kg/l)

SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature to which dry sealer is subjected.) 40ºF to 250ºF (4ºC to 121ºC)

DRYING TIME (ASTM D-1640):
(Drying time is dependent upon temperature, humidity, and film thickness.) To touch: less than 2 hours Through: overnight

COVERAGE:
(Coverage is dependent upon the nature of the substrate.) Lock Down: 150-500 sq. ft./U.S. gal. (3.7-12.2 sq. m/l) Fireproofing: Not less than 1,000 sq. ft./U.S. gal. (24.5 sq. m/l) when used with W.R. Grace Retro-Guard® Types RG and RG1. Not less than 150 sq. ft./U.S. gal. (3.7 sq. m/l) when used with Isolatek International Cafco® Blaze-Shield® Types D-C/F. Removal: 12.5-25 sq.ft./U.S. gal. (3.6 sq. m/l)

WET FLAMMABILITY (ASTM D-3278):
No flash to boiling 210ºF (98.9ºC)

SURFACE BURNING CHARACTERISTICS (ASTM E-84):
Flame Spread: 15
Smoke Developed: 0
Applied to 1/4 inch (6.35mm) inorganic reinforced cement board at a coverage rate of 150 sq. ft./ gal. The flame spread may vary at different product thicknesses and/or when applied over surfaces other than inorganic reinforced cement board. TM TradeMark of H.B. Fuller Construction Products Inc.

Visit us on the web at www.fosterproducts.com


See More


Specifications

ENCAPSULANT MATERIALS FIRE RESISTANCE CLASSIFICATION For use with Classified Types RG and RG1 cementitious mixtures manufactured by Zonolite Products Div, W.R. Grace & Co. at an application rate not less than 1000 sq ft/gal, and Type D-C/F sprayed fiber manufactured by Isolatek International at an application rate not less than 150 sq ft/gal. For use in beams, columns, joists and fluted steel floor and form units. Ability of this material to act as a sealant has not been investigated. See UL Fire Resistance Directory. 82P5
Sweetsstakes