Foster® 85-65 STIC-FAS™ ADHESIVE
FOSTER ® STIC-FAS ™ ADHESIVE
Foster ® Stic- FasTM Adhesive is a low odor rapid setting resin/polymer emulsion adhesive for adhering low density fibrous glass insulation, duct wrap and acoustical linings (up to 3 lbs/c.f.) in air handling systems. It has good wet grab, and can be applied to painted or unpainted steel, galvanized steel or aluminum surfaces.
Stic-Fas Adhesive is formulated for use in duct liner machines, both air atomized spray and roll coater types. It has excellent hot peel strength and high humidity resistance. Once dry and cured, it has outstanding water resistance.
Stic-Fas Adhesive is water based and non-flammable in the wet state. It meets the requirements of ASTM C916-85, Type II (ASC-A-7001, Type II)
Stic-Fas Adhesive meets NFPA-90A & 90B 25/50 requirements.
Stic-Fas Adhesive meets requirements for LEED IEQ 4.1 Low-Emitting Materials, Adhesives and Sealants. VOC: 2 g/l, less water and exempt solvents.
Stic-Fas Adhesive contains no asbestos, lead, mercury, or mercury compounds.
Store and apply between 40ºF (4ºC) and 100ºF (38ºC), protect from freezing until dry. Always test plastic foam insulation for warpage when using a water base adhesive. Not suggested for sealing vapor barrier jackets. Overhead applications may require mechanical fasteners.
Air atomized spray, brush, roller, or duct liner machine
AVERAGE WEIGHT/U.S. GALLON (ASTM D 1875):
8.8 lbs. (1.05 kg/l)
AVERAGE NON-VOLATILE (ASTM D 1644):
51% by volume (52% by weight)
COVERAGE (FSTM 72):
(Subject to type of surface and material being bonded)
Approx. 300-500 sq. ft./gal. (7.4 - 12.3 m2 /l)
150-300 sq. ft./gal. (3.7 - 7.4 m2 /l)
BONDING TIME RANGE (FSTM 66):
0 to 10 minutes (depending on temperature and humidity)
SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) Minus 20ºF to 200ºF (-29ºC to 93ºC)
WET FLAMMABILITY (ASTM D 3728):
Flash Point: No flash to boiling, over 200ºF (93ºC)
SURFACE BURNING CHARACTERISTICS (ASTM E 84):
Flame Spread: 0
Smoke Developed: 0
Tested at coverage rate of 300 sq. ft. per gal. (7.4 m2 /l)
Applied to 1/4 inch (6.4 mm) inorganic reinforced cement board. The flame spread may vary at different product thickness.
TM Tradem ark of H.B. Fuller Construction Products Inc.
Visit us on the web at www.fosterproducts.com