Foster™ -Foster® 85-15 Stic-Safe® Adhesive

DOWNLOADS

FOSTER ® STIC-SAFE ® ADHESIVE ASBESTOS-FREE Foster ® Stic-Safe ® Adhesive is a quick setting synthetic elastomer adhesive designed to adhere fibrous glass insulation (up to 6 lbs.) to sheet metal, such as galvanized steel or aluminum air-conditioning ducts, hot air ducts, and met


Category: HVAC adhesives | adhesives | commercial insulation...

MasterFormat: Common Work Results for Wood, Plastics, and Composites | Adhesives* | Thermal Protection...


Related Products

Overview


Foster® 85-15 Stic-Safe® Adhesive



FOSTER ® STIC-SAFE ® ADHESIVE ASBESTOS-FREE

Foster ® Stic-Safe ® Adhesive is a quick setting synthetic elastomer adhesive designed to adhere fibrous glass insulation (up to 6 lbs.) to sheet metal, such as galvanized steel or aluminum air-conditioning ducts, hot air ducts, and metal buildings. Fast drying. Permits bonding immediately or up to ten minutes open time.

Stic-Safe Adhesive special consistency permits fast, easy brushing of the adhesive to metal ducts and other surfaces. It is also used for lap sealing of vapor barrier jackets.

Stic-Safe Adhesive will bond insulation to wood, concrete and other construction materials. Coverage may be less than shown on rough or porous surfaces.

Stic-Safe Adhesive meets ASTM C916-79, Type IV (ASC-A-7001A, Type IV) and NFPA 90A & 90B 25/50 requirements.

Stic-Safe Adhesive is produced under the classification and follow- up service of Underwriter's Laboratories, Inc.

Stic-Safe Adhesive contains no asbestos, lead, mercury, or mercury compounds.

LIMITATIONS
Store and apply between 40ºF (4ºC) and 100ºF (38ºC). Always test plastic materials and painted surfaces for compatibility when using a solvent base product. Allow to dry to a solvent-free condition before installing weld pins. Make certain this product is completely dry and the area free from solvent odor if food is involved.




COLOR:
Yellow

APPLICATION CONSISTENCY:
Brush

AVERAGE WEIGHT / U.S. GALLON:
6.6 lbs. (0.79 kg/l)

AVERAGE NON-VOLATILE (ASTM D 1644):
30% by volume (40% by weight)

COVERAGE RANGE (FSTM 72):
(Subject to type of surface and nature of material being bonded.)

For insulation attachment:
200-250 sq. ft. per gal. (4.9 to 6.1 m2 /l) 0.008 in. to 0.006 in. wet thickness (0.20 mm to 0.16mm)

For lap sealing:
75-100 sq. ft. per gal. (1.8 to 2.5 m2 /l). Averages 500 lineal ft. (152 m) of 2 in. (51 mm) wide band of adhesive (0.021 in. to 0.016 in. wet thickness) (0.5 to 0.4 mm)

BONDING TIME RANGE (FSTM 66):
For insulation attachment: 0 to 10 minutes For lap sealing: 2 to 10 minutes

SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) -20ºF to 200ºF (-29ºC to 93ºC)

WET FLAMMABILITY (ASTM D 93):
Flash point -7ºF (-22ºC)

SURFACE BURNING CHARACTERISTICS (ASTM E 84):
Flame Spread: 10
Smoke Developed: 25
Tested at coverage rate of 200 sq. ft./gal. (4.9 m2 /l).
Applied to 1/4 inch (6.4mm) inorganic reinforced cement board. The flame spread may vary at different product thicknesses and/or when applied over other surfaces.


TM TradeMark of H.B. Fuller Construction Products Inc.

Visit us on the web at www.fosterproducts.com


See More


Sweetsstakes