Fabreeka International -Fabreeka Isolation Washers for Vibration Isolation & Impact Shock Control

DOWNLOADS

Isolation washers and Fabreeka bushings are used to eliminate metal-to-metal contact and break the vibration or shock transmission path. For example, the contact between a machine base and an anchor bolt as shown.


Category: equipment vibration control | isolation washers | noise suppression...

MasterFormat: Sound, Vibration, and Seismic Control



Fabreeka International
PO Box 210
1023 Turnpike Street
Stoughton, MA 02072
Tel: (800) 322-7352
Fax: (781) 341-3983

info@fabreeka.com

https://www.fabreeka.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Fabreeka Isolation Washers for Vibration Isolation & Impact Shock Control

Isolation washers and Fabreeka bushings are used to eliminate metal-to-metal contact and break the vibration or shock transmission path. For example, the contact between a machine base and an anchor bolt as shown.

Washers & bushings are typically used in conjunction with Fabreeka pads or Fabcel pads where the reduction of impact shock or isolation of transmitted vibration is required.

KEY FEATURES/BENEFITS
  • Isolation washers made from Fabreeka pad material can ultimately withstand loads up to 12,000 psi when used for “uplift” or rebound shock.
  • Isolation washers and bushings complete the isolation solution by eliminating the vibration and shock transmission path.
  • Washers can be die cut to any outside/inside diameter required for your application.

Technical Specifications

Isolation washers are manufactured to interface with standard bolt/washer sizes from 3/16″ to 3″.


See More


Sweetsstakes