Fabreeka International -FAB EPM HP® Foundation Isolation Material

DOWNLOADS

FAB-EPM HP® material is a mixed cell polyurethane foam specifically designed to provide low frequency vibration isolation for building and machine foundation isolation applications.


Category: isolation material | perimeter isolation | polyurethane foam isolation material...

MasterFormat: Sound, Vibration, and Seismic Control



Fabreeka International
PO Box 210
1023 Turnpike Street
Stoughton, MA 02072
Tel: (800) 322-7352
Fax: (781) 341-3983

info@fabreeka.com

https://www.fabreeka.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


FAB EPM HP® Foundation Isolation Material

FAB-EPM HP® material is a mixed cell polyurethane foam specifically designed to provide low frequency vibration isolation for building and machine foundation isolation applications. FAB-EPM HP material is manufactured in different densities, which allows for optimal isolation performance. FAB-EPM HP material is supplied in full sheet form, which becomes the base formwork for a concrete foundation. This advantage creates a simple construction method to reduce overall project cost.

KEY FEATURES/BENEFITS
  • The natural frequency of FAB-EPM HP® is dependent on load and type of material and ranges from 6 Hz to 40 Hz.
  • The damping rate of FAB-EPM HP is 4% - 9% of critical.
  • FAB-EPM HP is impervious to most chemicals, alkaline solutions and oils.
  • FAB-EPM HP is supplied in rolls 1.5M x 5M and in 12.5mm and 25mm thicknesses.
TECHNICAL SPECIFICATIONS

Permanent static loads cause a certain amount of creep (additional deflection over time) in all elastomeric materials. The long term creep of FAB-EPM HP material is very low when used in the static load range.


See More


Sweetsstakes