DoorKing, Inc. -Power Inverter & Backup Systems

DOWNLOADS

The Model 1000 Power Inverter provides backup power for a single-gated Access Control System when primary AC power fails. Maintain a fully operational Access Control System during power outages and brown-outs. Ideal for residential and commercial applications with a single-gate system.


Category: access control accessories | access control systems | electronic security...

MasterFormat: Access Control | Gate Operators



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

https://www.doorking.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Power Inverter & Backup Systems

The Model 1000 Power Inverter provides backup power for a single-gated Access Control System when primary AC power fails. Maintain a fully operational Access Control System during power outages and brown-outs. Ideal for residential and commercial applications with a single-gate system.

DoorKing's Model 1000 Power Inverter and Backup system is designed to provide backup power for your vehicular gate operator and access control system when primary (AC) power fails. Unlike DC Gate Operators that can only back-up the gate operator itself with internal batteries to run the DC motor, the model 1000 converts DC battery power to AC power to keep all system components, even the ones that are powered by AC Accessory transformers, operable at all times. DC gate operators do not convert their battery power to AC rendering all AC components of your system inoperable.


Features:
  • Selectable power out and power start options.

  • Selectable continuous operation mode or quick open mode.

  • Modified sine-wave or pure sine-wave output models are available.

  • Electronic control circuit monitors battery voltage while system is in inverter mode and commands gate operators to open when battery power reaches critical levels.

Specifications:
  • AC Output Voltage is 120 VAC, 60 Hz with ±10% regulation

  • Continuous Power Output is 1000 Watts

  • 1000-080 has a Modified Sine-Wave output and can power a single 1/2 HP gate operator system. Since this is a Modified Sine-Wave, this model should only be used with DKS gate operators as they have been designed to work within the limits of the Inverter's modified sine-wave.

  • 1000-082 has a Pure Sine-Wave output and can power two 1/2 HP gate operator systems or a single 1 HP system.

  • DC Input voltage is 10-15 VDC

  • Operating temperature 32°F (O°C) to 126°F (52°C)

  • Low battery alarm, low battery shutdown

  • Overload protection and Input short protection

  • Model 1000 uses 1 or 2 Maintenance Free, Rechargeable, Non-spillable, Sealed Lead-Acid (SLA), 12-Volt, 35 AH.

Model 1000

Options:

Modified Sine-Wave: 9 Amp maximum load.
Pure Sine-Wave: 12 Amp maximum load.
Use the Modified Sine-Wave model only with DKS gate operators. Use the Pure Sine-Wave model with all others.
IMPORTANT! The model 1000 can only be used with products that use a PSC (Permanent Split Capacitor) motor. Do Not use the model 1000 on products that utilize a motor with start windings as the start-up amperage draw on this type of motor exceeds the maxim


See More


Specifications

Backup Power
For a single-gated Access Control System when primary AC power fails.
Two Batteries
SLA can be accommodated in the cabinet.
Models
Model 1000
Sweetsstakes