DoorKing, Inc. -MicroCLIK® RF Controls

DOWNLOADS

MicroCLIK® RF Controls are designed to provide convenience and security, but do not have copy-proof encoding schemes found in the MicroPLUS®­ product line.


Category: RF access control systems | electronic security | radio frequency card access control systems...

MasterFormat: Hardware | Access Control



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

https://www.doorking.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


MicroCLIK® RF Controls

MicroCLIK® RF Controls are designed to provide convenience and security, but do not have copy-proof encoding schemes found in the MicroPLUS®­ product line. This allows MicroCLIK® Transmitter codes to be copied into the built-in Transmitters found in many luxury automobiles, however we do not guarantee this commonality or functionality.

Model 8040 Receiver
This Receiver can be programmed to receive a signal from the MicroPLUS or MicroCLIK Transmitters, which allows the homeowner to choose their
type of Remote.

The 8040 Receiver is also a low-power draw unit designed specifically for the solar application. It remains in a “sleep” mode until it receives a signal from a Transmitter, thus drawing about 1 milli-amp of power.

Model 8040 Receiver
The 8040 sends the transmitter codes to a access controller (such as a DKS 1830 Series System) in wiegand format. This receiver can also be programmed as a stand-alone device. It is also ideal for solar-powered applications as it has an extremely low power draw while in stand-by mode.

Model 8057 Receiver
The 8057 Receiver is a fully programmable stand-alone receiver that can store up to 16,000 transmitter codes. Codes can be added or deleted individually, or in block format.


Features:
  • Provides remote operation of vehicular access gates from the safety and convenience of a vehicle

  • Over 1,000,000 transmitter codes available

  • PROXmtr™ includes a built in proximity card with the MicroCLIK transmitter combining both RF and card access control into a single compact unit

  • Transmitters available with 1, 2 or 3 buttons

  • MicroCLIK® RF controls may be used as a stand-alone access control system or can be interfaced with 26 or 31-bit wiegand controllers

  • HomeLink® compatible

Listings
  • FCC (US): LSD8059RX

  • FCC (US): LSD8068T

  • DOC (CAN): 1736 102 138

Specifications:
8040 Receiver
  • Primarily used as a 26, 30 or 31-bit wiegand output receiver

  • Can be set for stand-alone operation, 100 codes maximum

  • Low power mode for solar-powered operation

  • Can be used with MicroClik or MicroPlus transmitters

  • Form C relay.

  • 12-24 volt AC or DC.

8057 Receiver
  • Stand-alone receiver

  • Stores up to 16,000 MicroClik transmitter codes

  • Built-in programming keypad

  • Add or delete transmitters individually or in block format

  • Programmable facility codes, relay strike time, transmitter button number

  • Form C dry contact relay

  • 12-24 Volt AC or DC

Options:

Model 8057 receiver memory: 50, 100, 250, 500, 1000, 5000, 16000 - choose one.
Transmitters: 1, 2 or 3 button.
PROXmitters: DK Prox, AWID or HID proximity tags - specify which.


See More


Specifications

Convenience
HomeLink® compatible: copy your codes to your vehicle’s built-in system.
Antenna Options
Directional yagi antenna for improved range, and antenna amplifiers.
Models
RF ReceiversTransmitters8040 Receiver
Sweetsstakes