GRABER Faux Wood Blinds

GRABER Faux Wood Blinds

Traditions® Composite and Lake Forest® Faux Wood offer stylish alternatives to natural wood blinds. The alternative wood slats resist moisture and warping while meeting the requirements of NFPA 701. Graber® Faux Wood and Composite blinds are available in a broad assortment of woodtone and solid colors that coordinate with Graber Traditions® natural wood blinds.

• PVC-free slats meet NFPA 701
  
• Authentic look of natural wood grain
  
• 1-5/8 x 2-1/4″ SureClose® headrail system
  
• Trapezoid bottomrail
  
• NoHoles™ optional
  
• 1″ (2″ slat only) and 2-1/2″ cloth tape optional
  
• 2″, 2-1/2″ flat profile and 2-1/2″ shutter-style slat options
  
• Limited-lifetime warranty

SureClose® Headrail shall be 1-5/8″ high x 2-1/4″ wide x .022″ thick U-shaped steel with 1/8″ light blocking lip on the bottom center line. The steel finishing process includes phosphate treatment for corrosion resistance, a chrome-free sealer, a low HAP urethane primer and a topcoat with low HAP polyester baked enamel.

Cord Tilter shall be a snap-in component incorporating a worm and pulley of low-friction thermoplastic and nylon gear. Tilt cords shall be secured to pulley and treated with wood tassels at tilt end. Cord tilter is standard.

Tilt rod shall be electro-zinc coated solid steel measuring 1/4″ square..

Cord lock shall be metal of a snap-in design incorporating a floating, shaft-type locking pin and shall incorporate a crash proof safety feature that will lock blind automaticallyupon release of cord.

Drums shall be made of high strength thermoplastic, which securely anchors braided ladder or cloth tapes.

Installation brackets shall be a rivet-hinged front cover phosphate-treated steel with urethane primer and polyester baked enamel finish to match headrail.

Braided ladder shall be made of 100% polyester yarn incorporating two extra strength rungs per ladder for slat support. Standard ladder spacing shall be 44mm.

Slats shall be a blend of PVC-free polystyrene measuring 2″ wide x 1/8″ thick with straight cut edges. Slats meet the requirement of NFPA 701 Test Method 1-2004 edition.

Bottomrail shall be a blend of PVC polymers 7/8″ high x 2″ wide in a trapezoid shape to improve closure and shall coordinate with slats.

• Flat 2″ vinyl slats meet NFPA 701
  
• Printed slats mimic the look of real wood
  
• 1-5/8 x 2-1/4″ SureClose® headrail system
  
• Trapezoid bottomrail
  
• Cord tilt only
  
• Braided ladder standard
  
• Cloth tapes optional
  
• NoHoles™ optional
  
• Five-year limited warranty

SureClose® Headrail shall be 1-5/8″ high x 2-1/4″ wide x .022″ thick U-shaped steel with 1/8″ light blocking lip on the bottom center line. The steel finishing process includes phosphate treatment for corrosion resistance, a chrome-free sealer, a low HAP urethane primer and a topcoat with low HAP polyester baked enamel.

Cord Tilter shall be a snap-in component incorporating a worm and pulley of low-friction thermoplastic and nylon gear. Tilt cords shall be secured to pulley and treated with wood tassels at tilt end.

Tilt rod shall be electro-zinc coated solid steel measuring 1/4″ square..

Cord lock shall be metal of a snap-in design incorporating a floating, shaft-type locking pin and shall incorporate a crash proof safety feature that will lock blind automatically upon release of cord. End of lift cords will be treated with tassels.

Drums shall be made of high strength thermoplastic, which securely anchors braided ladder.

Installation brackets shall be a rivet-hinged front cover phosphate-treated steel with urethane primer and polyester baked enamel finish to match headrail.

Braided ladder shall be made of 100% polyester yarn incorporating two extra strength rungs per ladder for slat support. Standard ladder spacing shall be 44mm.

Slats shall be a blend of PVC-free polystyrene measuring 2″ wide x .10″ thick with straight cut edges. Slats meet the requirement of NFPA 701 Test Method 1-2004 edition.

Bottomrail shall be extruded foam PVC 9/16″ high x 2″ wide and shall coordinate with slats.

• Flat vinyl slats meet NFPA 701
  
• 1-5/8 x 2-1/4″ SureClose® headrail system
  
• Rectangle bottomrail
  
• Cord tilt only
  
• Braided ladder standard
  
• Cloth tapes optional
  
• NoHoles™ optional
  
• 2″ and 2-1/2″ slat width options
  
• Five-year limited warranty

SureClose® Headrail shall be 1-5/8″ high x 2-1/4″ wide x .022″ thick U-shaped steel with 1/8″ light blocking lip on the bottom center line. The steel finishing process includes phosphate treatment for corrosion resistance, a chrome-free sealer, a low HAP urethane primer and a topcoat with low HAP polyester baked enamel.

Cord Tilter shall be a snap-in component incorporating a worm and pulley of low-friction thermoplastic and nylon gear. Tilt cords shall be secured to pulley and treated with wood tassels at tilt end.

Tilt rod shall be electro-zinc coated solid steel measuring 1/4″ square..

Cord lock shall be metal of a snap-in design incorporating a floating, shaft-type locking pin and shall incorporate a crash proof safety feature that will lock blind automatically upon release of cord. End of lift cords will be treated with tassels.

Drums shall be made of high strength thermoplastic, which securely anchors braided ladder.

Installation brackets shall be a rivet-hinged front cover phosphate-treated steel with urethane primer and polyester baked enamel finish to match headrail.

Braided ladder shall be made of 100% polyester yarn incorporating two extra strength rungs per ladder for slat support. Standard ladder spacing shall be 44mm.

Slats shall be a blend of PVC-free polystyrene measuring 2″ wide x .10″ thick with straight cut edges. Slats meet the requirement of NFPA 701 Test Method 1-2004 edition.

Bottomrail shall be extruded foam PVC 9/16″ high x 2″ wide and shall coordinate with slats.

• 2″ wide PVC crowned slats meet NFPA 701
  
• 1-5/8 x 2-1/4″ SureClose® headrail system
  
• Cord tilt standard, wand tilt optional
  
• 1″ and 1-1/2″ cloth tapes option
  
• Coordinates with 3-1/2″ PVC vertical louvers
  
• Limited-lifetime headrail warranty

SureClose® Headrail shall be 1-5/8″ high x 2-1/4″ wide x .022″ thick U-shaped steel with 1/8″ light blocking lip on the bottom center line. The steel finishing process includes phosphate treatment for corrosion resistance, a chrome-free sealer, a low HAP urethane primer and a topcoat with low HAP polyester baked enamel.

Cord Tilter shall be a snap-in component incorporating a worm and pulley of low-friction thermoplastic and nylon gear. Tilt cords shall be secured to pulley and treated with wood tassels at tilt end.

Tilt rod shall be electro-zinc coated solid steel measuring 1/4″ square..

Cord lock shall be metal of a snap-in design incorporating a floating, shaft-type lockng pin. Cord lock shall incorporate a crash proof safety
feature that will lock blind automatically upon release of cord.

Drums shall be made of high strength thermoplastic, which securely anchors braided ladder or cloth tapes.

Installation brackets shall be a rivet-hinged front cover phosphate-treated steel with urethane primer and polyester baked enamel finish to match headrail.

Braided ladder shall be made of 100% polyester yarn incorporating two extra strength rungs per ladder for slat support. Standard ladder spacing shall be 44mm.

Slats shall be rigid UV stabilized crowned PVC nominally 2″ wide x .045″ thick with straight cut edges. Slats meet the requirement of NFPA 701 Test Method 1-2004 edition..

Bottomrail shall be extruded foam PVC 9/16″ high x 2″ wide and shall coordinate with slats.

We are offering the following selections :
Graber Brand - Faux wood blinds in 2 inch

Graber Brand - Faux wood blinds in 2 inch Premium

Graber Brand - Faux wood blinds in 2 1/2 inch

See More

See Less