Search Results for Manufacturer-Robbins-Lightning--Inc

Below you will find links to company and product information for manufacturers and suppliers in Sweets matching the term Manufacturer-Robbins-Lightning--Inc ... more


8
8
Products
Results per page:

Robbins Lightning, Inc. - Robbins Lightning Protection Systems
Robbins Lightning, Inc. - Robbins Lightning Protection Systems
Description: The Installation of a Modern Lightning Protection System covering the entire building serves the purpose of making paths over which the Earth's charges can easily travel upward to the roof of the building to be dissipated off the sharp lightning rods, thereby eliminating a build-up of these...

Robbins Lightning, Inc. - Parallel Cable Splicer - Copper
Robbins Lightning, Inc. - Parallel Cable Splicer - Copper
Description: Heavy cast bronze or aluminum cable splicer with two 1/4” bolts for tension on cable — for straight cable run splice or tee splice by bending cable. Two sizes available — No. 52 for main sized copper cables only through No. 601, 3” long — No. 52A and No. A52A for main sized copper cables No. 601...

Robbins Lightning, Inc. - Cast Adhesive Point Base with Cast Swivel - Copper
Robbins Lightning, Inc. - Cast Adhesive Point Base with Cast Swivel - Copper
Description: Heavy cast bronze or aluminum adhesive point base for mounting on flat or gently sloping roofs — used where no holes can be made in mounting surface, such as built-up tar and gravel or membrane roofing — adjustable point holder. Cable contact 1-1/2” for main sized cables through No. 605. Base...

Robbins Lightning, Inc. - Cable Loop Fastener - Large
Robbins Lightning, Inc. - Cable Loop Fastener - Large
Description: LOOP FASTENER (SMALL) Strap copper or aluminum loop type cable fastener requiring one nail or screw — 1/2” wide, copper 0.032” thick, aluminum 0.051” thick — for main and secondary cables 1/4” through 1/2” diameter — for nail or screw to No. 10 (3/16”) diameter. Cat. No. 72A — Copper - 0.26 oz....

Robbins Lightning, Inc. - Cast Universal Point Base
Robbins Lightning, Inc. - Cast Universal Point Base
Description: Heavy cast bronze or aluminum combination point base for all mounting applications. Swivel can be threaded for 3/8”, 1/2” or 5/8” point. Bolt tension cable holder with 1-1/2” contact and three anchor holes for fasteners. When used in an adhesive application, the base should be set with...

Robbins Lightning, Inc. - Aluminum Conductors
Robbins Lightning, Inc. - Aluminum Conductors
Description: STANDARD OF THE INDUSTRY FOR STRUCTURES 75’ HIGH OR LESS Cat. No. A1 — 26 strands of 14 gauge bare aluminum wire in basket weave configuration, 1/2” diameter, 106,800 circular mil cross section, (#1/0 AWG). Weight of aluminum – 102 pounds per 1,000’ minimum. Available on 250’ and 500’ spools....

Robbins Lightning, Inc. - Bonding Plate Beam Clamp - Copper
Robbins Lightning, Inc. - Bonding Plate Beam Clamp - Copper
Description: Heavy cast bronze or aluminum metal bonding plate — over 8 square inches of contact surface and 1-1/2” cable contact. Cap may be rotated for alternate cable position. Provided with 2 cast, “C” clamps to fasten to steel surface. For main sized cables through No. 605. Overall dimensions - 2-1/4” x...

Robbins Lightning, Inc. - Pipe Bonding Clamp - Copper
Robbins Lightning, Inc. - Pipe Bonding Clamp - Copper
Description: Heavy cast bronze or aluminum pipe bonding clamp with 1/4” bolt tension — 1-1/2” cable contact along axis of pipe. Available in three sizes for a range of pipe sizes. Bronze clamps may be lead coated, on request, to prevent corrosion when used on water pipes. Add “L” to part numbers shown. For...