Search Results for Manufacturer-Johns-Manville-Roofing-Systems

Below you will find links to company and product information for manufacturers and suppliers in Sweets matching the term Manufacturer-Johns-Manville-Roofing-Systems ... more


7
7
Products
Results per page:

Johns Manville Roofing Systems - JM EPDM NR - EPDM Roofing Systems
Johns Manville Roofing Systems - JM EPDM NR - EPDM Roofing Systems
Description: Membrane: Nonreinforced, cured EPDM (ethylene propylene diene monomer). Fully Extruded: Produces fewer air voids, more uniform thickness and smoother...

Johns Manville Roofing Systems - JM EPDM Peel and Stick Flashing - EPDM Roofing Systems
Johns Manville Roofing Systems - JM EPDM Peel and Stick Flashing - EPDM Roofing Systems
Description: JM EPDM Peel & Stick Flashing is a 6", 9", and 12" (30.48 cm) wide, uncured EPDM (ethylene propylene diene monomer) sheet with a diamond texture on the top side with a release...

Johns Manville Roofing Systems - JM EPDM Peel and Stick Inside/Outside Corners - EPDM Roofing Systems
Johns Manville Roofing Systems - JM EPDM Peel and Stick Inside/Outside Corners - EPDM Roofing Systems
Description: JM EPDM Peel & Stick Inside/Outside Corners consist of 60 mil thick (1.5 mm) uncured flashing with a pre-applied peel and stick tape.

Johns Manville Roofing Systems - JM EPDM R - EPDM Roofing Systems
Johns Manville Roofing Systems - JM EPDM R - EPDM Roofing Systems
Description: Meets the requirements of ASTM D 4637, Type II Membrane: Cured EPDM (ethylene propylene diene monomer) reinforced with a tough 1,000+ denier...

Johns Manville Roofing Systems - JM EPDM R FIT Systems - EPDM Roofing Systems
Johns Manville Roofing Systems - JM EPDM R FIT Systems - EPDM Roofing Systems
Description: Meets the requirements of ASTM D 4637, Type II Membrane: Cured EPDM (ethylene propylene diene monomer) reinforced with a tough 1,000+ denier...

Johns Manville Roofing Systems - JM EPDM Metal/Membrane Flashing - EPDM Roofing Systems
Johns Manville Roofing Systems - JM EPDM Metal/Membrane Flashing - EPDM Roofing Systems
Description: JM EPDM Metal/Membrane Flashing is a specially designed and manufactured flashing for sealing and waterproofing JM EPDM roofing systems where they join an adjacent bituminous roof membrane.

Johns Manville Roofing Systems - JM EPDM NR FIT Systems - EPDM Roofing Systems
Johns Manville Roofing Systems - JM EPDM NR FIT Systems - EPDM Roofing Systems
Description: Meets the requirements of ASTM D 4637, Type I Membrane: Nonreinforced, cured EPDM (ethylene propylene diene monomer).