reThink Wood - Wind Resistance

Wind load requirements are covered under the national code standards but may vary from jurisdiction depending on wind zones. Wood has inherent characteristics that make it ideal in areas prone to high wind. All buildings are at risk during high winds and each structure, with its own unique set...


Category: dimensioned lumber | lumber | lumber products...

MasterFormat: Mechanically Graded Lumber | Heavy Timber Framing | Laminated Veneer Lumber...



reThink Wood
14959 Delano Street
Van Nuys, CA 91411

info@rethinkwood.com

http://www.rethinkwood.com

Request More Info

DOWNLOADS

Related Products

Overview



Wind Resistance

Wind load requirements are covered under the national code standards but may vary from jurisdiction depending on wind zones. Wood has inherent characteristics that make it ideal in areas prone to high wind. All buildings are at risk during high winds and each structure, with its own unique set of characteristics such as stiffness and strength, reacts differently to wind loads. However, wood buildings can be designed to resist high winds.

Wood's elastic limit and ultimate strength are higher when loads are applied for a short time, which tends to be the case in high wind events. As with seismic performance, the fact that wood buildings tend to have numerous nail connections also means they have more load paths, so there's less chance the structure will collapse should some connections fail.

Further, when structural panels such as plywood or oriented strand board (OSB) are properly attached to lumber framing, they also form some of the most solid and stable roof, floor and wall systems available. When used to form diaphragms and shear walls, they are exceptional at resisting high winds.


Wind Resistance


reThink Wood
E-mail: info@rethinkwood.com
Web site: http://www.rethinkwood.com





Sweets app for Revit – Learn More