Xypex Chemical Corporation - Xypex Modified Crystalline Waterproofing/Damproofing Coating

Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to dampproof the exterior of foundation walls. Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where damppro


Category: cementitious coatings | chemical waterproofing | crystalline waterproofing...

MasterFormat: Crystalline Waterproofing | High-Performance Coatings | Concrete and Masonry Coatings...



Xypex Chemical Corporation
13731 Mayfield Place
Richmond, BC V6V 2G9
Tel: (800) 961-4477

enquiry@xypex.com

http://www.xypex.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Xypex Modified Crystalline Waterproofing/Damproofing Coating

Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to dampproof the exterior of foundation walls. Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where dampproofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

Recommended for:
  • Reservoirs
  • Sewage and Water Treatment Plants
  • Secondary Containment Structures
  • Tunnels and Subway Systems
  • Underground Vaults
  • Foundations
  • Parking Structures
  • Swimming Pools


See More

Features
  • Resists extreme hydrostatic pressure

  • Becomes an integral part of the substrate

  • Allows concrete to breathe

  • Resistant to aggressive chemicals

  • Non-toxic

  • Does not require dry weather or a dry surface

  • Cannot puncture, tear or come apart at the seams

  • No costly surface priming or leveling prior to application

  • Does not require sealing, lapping and finishing ofseams at corners, edges or between membranes

  • Can be applied to the positive or the negative sideof the concrete surface

  • Does not require protection during backfilling or during placement of steel, wire mesh or other materials

  • Less costly to apply than most other methods

  • Not subject to deterioration

  • Permanent


Sweets app for Revit – Learn More