Wayne-Dalton -Thermospan® 200 Insulated Sectional Steel Door

DOWNLOADS
Wayne Dalton Thermospan ® Model 200 provides premium thermal efficiency and low maintenance costs, resulting in a door that costs less to own.

Category: industrial doors

MasterFormat: Specialty Doors and Frames | Industrial Doors | Panel Doors...



Wayne-Dalton
P.O. Box 67
Mt. Hope, OH 44660
Tel: (800) 764-1457

http://www.wayne-dalton.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Thermospan® 200 Insulated Sectional Steel Door

Wayne Dalton Thermospan® Model 200 provides premium thermal efficiency and low maintenance costs, resulting in a door that costs less to own. Continuous foamed-in-place polyurethane insulation and a non-conductive thermal break between the inner and outer skins combine to provide a U-value* of .057 and an R-value* of 17.50.

The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corruption.

*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.


Features


Key Product Features
  • Max Width: 40’2”
  • Max Height: 32’1”
  • 20-gauge exterior steel
  • Polyurethane insulation, R-value* = 17.5, U-value* = .057
  • 2” section thickness
  • 10,000 cycle standard spring
  • Patented, roll-formed integral struts for rigidity
  • Embossed stucco exterior with pinstripes

*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.

IECC® Compliant

The Thermospan® Model 200 meets IECC® requirements for maximum U-factor of operable fenestrations (2015 Section C402.4) with a 3rd party certified tested value of less than 0.37. Thermospan® Model 200 also meets the ASHRAE 90.1 and IECC® requirement for maximum air leakage for fenestration assemblies (2015 Section C402.5.2 Garage doors) with a 3rd party certified tested value of less than 0.40.


Door Options


Lite Options

Insulated Vision Lites allow for visibility while maintaining security. Full-view sections allow for maximum natural light and visibility.

Options & Accessories
  • Pass door
  • Chain hoist operation
  • Motor operation
  • Sensing edges
  • Photo eyes
  • High cycle spring (25k, 50k, 100k)
  • 3” track option
  • Solid shafts
  • Perimeter weather seal
  • Special track designs
  • Mullions
Impact Panel

Wayne Dalton’s optional Impact Section replaces the traditional bottom section on doors exposed to damage from forklifts and other warehouse traffic.

  • Reduces downtime and costly repairs
  • Impact-Resistant composite skins surround an expanded polystyrene core
  • Fully adaptable to multiple door thicknesses with hinge and section adapters to provide a superior fit
  • Available for 21" and 24" sections
  • Available from 8’2” to 16’2” wide in one-foot increments

*Static and Impact Wind Load designs are certified by the state of Florida (FBC), the Texas Department of Insurance (TDI), and the designs are compliant with the 2015 IBC. No Miami DADE certifications.


See More


Specifications

Door Construction
  1. Joint seal prevents air infiltration and saves energy
  2. Thermal break separates inner and outer skins so virtually no head or cold is conducted through the section.
  3. Pre-painted inner and outer skins for added corrosion resistance. Both skins are also hot-dipped galvanized steel for further protection against corrosion.
  4. Solid polyurethane core provides maximum thermal efficiency and aids in quiet operation
  5. Integral struts – Two 1-3/4” roll-formed struts per section increase rigidity and strength.
  6. Two-inch nominal thickness
  7. Embossed pinstriping (grooves) on the embossed stucco outer skin adds strength and enhances appearance.
Color Options
White Stucco
Tan Stucco
Brown Stucco
Sweetsstakes