Wayne-Dalton -Model DS-100 Roll-Up Sheet Door

DOWNLOADS
Our DS Series Roll-Up Sheet doors are designed to be versatile, durable and easy to operate.

Category: storage shed doors | storage unit doors

MasterFormat: Specialty Doors and Frames | Coiling Doors and Grilles | Overhead Coiling Doors



Wayne-Dalton
P.O. Box 67
Mt. Hope, OH 44660
Tel: (800) 764-1457

http://www.wayne-dalton.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Model DS-100 Roll-Up Sheet Door

Our DS Series Roll-Up Sheet doors are designed to be versatile, durable and easy to operate. Each door in the DS Series is constructed of 26-gauge, galvanized steel and features automatic door stops, a steel axle to support the door curtain and counterbalance system and oil-tempered steel springs for smooth cycle performance. With a variety of colors, options and sizes to choose from, these doors will fit almost any commercial application.

Model DS-100 is perfect for light commercial applications with openings up to 10’ wide by 10’ high, such as mini-storage buildings, loading docks, and service buildings. 18-gauge guides allow for easy installation to masonry or steel with no special preparation or overhead tracks needed.


Features


Key Product Features
  • Max Width: 10’
  • Max Height: 10’
  • 26-gauge galvanized steel
  • Manual lift operation

Product Information

  • Corrugated door curtain, available in round or square profile, is hot-dipped galvanized 26-gauge steel, primed then finished with high gloss, silicone polyester paint.
  • Polypropylene anti-wear strips come factory-installed as continuous guides for sliding metal parts, providing quieter operation and longer service life.
  • Rigid support bracket with bearings hold constant door tension, and allow easy adjustments.
  • Bottom bar assembly includes heavy-duty steel angle, extruded aluminum bottom bar and replaceable tubular-type vinyl astragal.
  • Slide-bolt assemblies fabricated of heavy-duty steel lock the closed door from inside at the bottom corners (not shown; door has optional mini curtain lock.) For added security, both slide bolts accept padlocks.
  • Roll-up door guides are 18-gauge galvanized steel, 2" wide and install to masonry, steel or wood construction equally well.
  • Automatic door stops prevent door from rolling up past the header.
  • Oil-tempered steel spring is engineered to counterbalance different door sizes and weights for smooth, easy operation.
  • Heavy-duty steel axle supports door curtain and counterbalance system.

Door Options


Options & Accessories
  • Wind load available up to ±34 psf on doors 10’ maximum in width
  • Insulation featuring two layers of aluminum mylar film laminated to two layers of heavy-duty polyethylene air-bubble material. An R-value* of 4 helps control heat gain/loss. Includes flexible vinyl top and side draft stops as weather seals between the door and the building.
  • Locks: slide bolt or curtain

*Wayne Dalton uses a calculated door section R-value for insulated doors.


See More


Specifications

Color Options
White
Royal Blue
Mist-white
Yellow
Sunset Orange
Polar Blue
Cedar Red
Desert Tan
Teal
Bronze Brown
Valentine Red
Patriot Red
Sea Green
Fern Green
Hunter Green
Maroon
Purple
Continental Brown
Sweetsstakes