Urethane Polymers International, Inc. - M-C-POXY Polymer Flooring System "T"

DOWNLOADS
Heavy Duty, Trowel-Applied Epoxy Industrial Flooring Scope: This specification covers the installation of a heavy-duty epoxy floor topping designed to resist chemical and mechanical abuse

Category: self-leveling floor toppings | self-leveling flooring | waterproof flooring systems...

MasterFormat: Dampproofing and Waterproofing | Traffic Coatings | Resinous Flooring...



Urethane Polymers International, Inc.
10880 Poplar Avenue
Fontana, CA 92337
Tel: (800) 560-0230
Fax: (909) 357-7215

awren@urethanepolymers.com

https://www.urethanepolymers.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


M-C-POXY Polymer Flooring System "T"

Heavy Duty, Trowel-Applied Epoxy Industrial Flooring

Scope: This specification covers the installation of a heavy-duty epoxy floor topping designed to resist chemical and mechanical abuse. M-C-POXY SYSTEM “T” is a seamless epoxy topping which consists of 100% solids, two component epoxy resin binders that are blended with quartz and silica aggregate and trowel-applied to form a ¼ inch (6.25 mn) thick flooring system. M-C-POXY SYSTEM “T” is an aesthetic, chemical resistant and high traffic resistant flooring surface which is intended for institutional, industrial and commercial use.

Work Included: Furnish and install the M-C-POXY SYSTEM “T” seamless flooring as manufactured by Urethane Polymers International, Inc. The flooring is to be installed to an average 1/4 inch thickness and shall be installed as a 1/8 inch cove base to the height specified. Apply in accordance with the architectural drawings and room finish schedules as shown and the latest instructions supplied by UPI. Include all material, labor and equipment required to complete the installation over the surfaces designated.


See More


Specifications

M-C-POXY System "T"
Steps UPI Product Amount/100 sq.ft.
Concrete Substrate
Primer/Sealer UI-7051 0.29 – 0.40 gal.
Base Coat and Epoxy Aggregate Mortar UI-7051 Mortar mixed and applied at 1/4-inch thickness
Grout Coat UI-7128 Epoxy Grout Coat 0.57 – 0.80 gal.
Texturing Aggregate Flint Shot Silica 15 – 20 lbs.
Topcoat UI-7128 0.66 – 1 gal.
Sweets app for Revit – Learn More