Urethane Polymers International, Inc. - M-C-POXY Polymer Flooring System "S-HD"

DOWNLOADS
This specification covers the installation of a chemical resistant epoxy topping which consists of 100% solids epoxy resin combined with a cycloaliphatic amine hardener and properly sized quartz aggregate to form a minimum 1/8 inch thick self-leveling flooring system.

Category: self-leveling floor toppings | textured flooring | waterproof flooring systems...

MasterFormat: Dampproofing and Waterproofing | Traffic Coatings | Resinous Flooring...



Urethane Polymers International, Inc.
10880 Poplar Avenue
Fontana, CA 92337
Tel: (800) 560-0230
Fax: (909) 357-7215

awren@urethanepolymers.com

https://www.urethanepolymers.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


M-C-POXY Polymer Flooring System "S-HD"

Heavy Duty, Seeded, Epoxy Industrial Flooring

Scope: This specification covers the installation of a chemical resistant epoxy topping which consists of 100% solids epoxy resin combined with a cycloaliphatic amine hardener and properly sized quartz aggregate to form a minimum 1/8 inch thick self-leveling flooring system. M-C-POXY SYSTEM “S-HD” cures completely at ambient temperature to form an acid and alkali resistant topping which is intended for use in institutional, industrial and commercial facilities. This system is suitable for heavy foot traffic and moderate forklift traffic.

Work Included: Furnish and install the M-C-POXY SYSTEM “S-HD seamless flooring as manufactured by Urethane Polymers International, Inc. The flooring is to be installed to a minimum 1/8 inch thickness and shall be installed on a cove base to the height specified. Apply in accordance with the architectural drawings and room finish schedules as specified and the latest instructions supplied by Urethane Polymers International, Inc. Include all material, labor and equipment required to complete the installation over the surfaces designated.


See More


Specifications

M-C-POXY System "S-HD"
Steps UPI Product Amount/100 sq.ft.
Concrete or Plywood Substrate
Primer/Sealer UI-7051 0.25 – 0.33 gal.
Base Coat UI-7051 1.25 gal.
Aggregate Decorative Quartz 50 lbs.
Base Coat UI-7051 1.25 gal.
Aggregate Decorative Quartz 50 lbs.
Topcoat UI-7127 0.80 – 1 gal.
Topcoat UI-7127 0.40 – 0.66 gal.
Sweets app for Revit – Learn More