Tnemec Company Inc. -Series 1071V Fluoronar - Advanced Thermoset Solution Fluoropolymer

DOWNLOADS

Generic Type

Advanced Thermoset Solution Fluoropolymer

Common Usage

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application.


Category: factory-applied coatings for metal | metal roof coatings | special coatings...

MasterFormat: Common Work Results for Metals | Shop-Applied Coatings for Metal | High-Performance Coatings...



Tnemec Company Inc.
6800 Corporate Drive
Kansas City, MO 64120
Tel: (816) 326-4264

ist@tnemec.com

https://www.tnemec.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Series 1071V Fluoronar - Advanced Thermoset Solution Fluoropolymer

Generic Type

Advanced Thermoset Solution Fluoropolymer

Common Usage

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

Intermediate

Series 73, 750, 1075, 1075U. (Intermediate coat may be required for some applications, please contact your Tnemec coating consultant.) Note: When topcoating with Series 1071V, the following maximum recoat times apply: Over 27, L69, L69F, N69, N69F, V69, V69F or 135, 14 days; over itself, 30 days; over 750, 1075 or 1075U, 45 days; over 73, 90-97, H90-97, 91-H²O or 94-H²O, 90 days.

Curing Time

Temperature - To Touch - To Handle - Minimum Recoat ‡

90°F (32°C) - 30 minutes - 3-4 hours - 4-6 hours

70°F (21°C) - 30 minutes - 6-8 hours - 12-16 hours

50°F (10°C) - 30 minutes - 12-16 hours - 16-20 hours

‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness.
Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.

Recommended DFT

2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.

Volatile Organic Compounds

Unthinned: 0.81 lbs/gallon (97 grams/litre)
Thinned 10% (No. 65 Thinner): 0.81 lbs/gallon (97 grams/litre)
Thinned 10% (No. 63 Thinner): 1.58 lbs/gallon (189 grams/litre) (TBAc Exempt)
Thinned 8% (No. 63 Thinner): 2.03 lbs/gallon (244 grams/litre) (TBAc Non-Exempt) †

Primers

Series 1, 27, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H²O, 94-H²O, 135, 394. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1071V.

Finish

Semi-Gloss

Volume Solids

56.0 ± 2.0% (mixed) †

Theoretical Coverage

898 mil sq ft/gal (22.0 m²/L at 25 microns) †

Number of Components

Two: Part A and Part B


See More


Sweetsstakes