ThermaCoustic Industries International Limited - AcoustiFinish™ AF90 Spray Applied Acoustic Ceiling & Wall Finish

PRODUCT NAME AcoustiFINISH ™ AF90 (Hereinafter known as AF90) AF90 is a fibreglass-based product that provides a textured ceiling finish that will meet the needs of the most demanding design. 1. MANUFACTURER AF90 is a two-component product manufactured by ThermaCoustic Industries International...


Category: acoustic spray insulation | coatings | spray insulation...

MasterFormat: Acoustical Ceilings | Acoustic Insulation | Sprayed Acoustic Insulation...



ThermaCoustic Industries International Limited
Unit 108, 20119 - 113B Avenue
Maple Ridge, BC V2X 0Z1
Tel: (866) 460-1474
Fax: (604) 460-1476

info@thermacoustics.com

http://www.thermacoustics.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



AcoustiFinish™ AF90 Spray Applied Acoustic Ceiling & Wall Finish

AcoustiFinish AF90 Spray Applied Acoustic Ceiling & Wall Finish

PRODUCT NAME

AcoustiFINISH AF90 (Hereinafter known as AF90)

AF90 is a fibreglass-based product that provides a textured ceiling finish that will meet the needs of the most demanding design.

1. MANUFACTURER

AF90 is a two-component product manufactured by ThermaCoustic Industries International Limited. The components of AF90 are supplied to trained, approved Applicators who complete on-site manufacturing during installation.

2. PRODUCT DESCRIPTION

A. Usage:

AF90 is a general-purpose system designed to meet a variety of acoustic needs in the industrial, commercial and multi-family construction sectors.

B. Materials:

AF90 is a two component system. The components are:

a) Fine, white glass fibres containing at least 35% recycled raw material;

b) A specifically formulated synthetic emulsion adhesive that is non- hazardous.

These components are combined on the site to produce an inorganic, non-combustible, non-toxic, odourless and long-lasting bright white installation.

C. Applications:

When sprayed into place, AF90 forms a monolithic, somewhat resilient and flexible finish that bonds easily to concrete, clean steel, aluminum, wood, gypsum board, rigid fibreglass and plastic insulation materials.

D. Limitations:

AF90 is normally applied to any surface in a one-pass application. The maximum thickness of any installation will not likely exceed 25 mm (1.0 in) as further acoustic benefit is unlikely to accrue from greater thickness.

a) Adhesive must be kept from freezing;

b) Do not apply AF90 at temperatures below 4°C (40°F) or when temperatures during curing time will fall below the limit unless heating of substrate and ambient air is supplied and both heat and adequate ventilation are maintained throughout the curing period;

c) Store AF90 components in a cool, dry location and above ground level.

3. TECHNICAL DATA

ASTM C-423-08:NRC = 0.90 (25 mm/1 in)
ASTM C-423-08:NRC = 0.60 (12.5 mm/0.5 in)
ISO 354:2003:NRC = 0.60 (12.5 mm/0.5 in)
ASTM C-518:R = 3.7/in; RSI = 20.02/m
K = 0.27; λ = 0.0390
CAN/ULC S-114:Non-combustible
ASTM E-136:Non-combustible
ASTM E-84:Flame spread ≤ 25
Smoke development ≤ 450
MIL-STD 810E:
(Method 508.4)
Fungal Resistance
- No growth

ThermaCoustic Industries International Limited
Unit 108, 20119 - 113B Avenue
Maple Ridge, BC V2X 0Z1
Tel: (604) 460-1475
Fax: (604) 460-1476
Tollfree: (866) 460-1474
E-mail: info@thermacoustics.com
Web site: http://www.thermacoustics.com





Sweets app for Revit – Learn More