Super-Krete Products - SK-E200 - Epoxy

DOWNLOADS

SK-E200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete.


Category: deck coatings | deck coatings | resin coatings...

MasterFormat: Cast-In-Place Concrete | Concrete Finishing | Dampproofing and Waterproofing...



Super-Krete Products
2705 Via Orange Way
Suite B
Spring Valley, CA 91978
Tel: (800) 995-1716
Fax: (619) 401-8288

info@super-krete.com

http://www.super-krete.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


SK-E200 - Epoxy

SK-E200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete. SK-E200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used. SK-E200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. SK-E200 primer with SK-P100 or SK-P501 top coats may be accomplished in one trip to the job site. Fewer trips to the job site result in reduction of labor costs.

Colors & Finishes
  • Bone
  • Flaxen
  • Wheat
  • Sand
  • Buff
  • Thatch Brown
  • Adobe
  • Red Brick
  • Seattle Red
  • Concrete Gray
  • Delta Fog
  • Sterling
  • Slate
  • Safety Yellow
  • Safety Red
  • Safety Blue
  • Clear
Packaging
  • 1.5 Gallons
  • 15 Gallons


See More


Sweets app for Revit – Learn More