Stanley Access Technologies LLC - Stanley Rush 1500 Series: Three- or Four-Wing Manual Revolver

DOWNLOADS

The 1500 Revolving door is available as a three-wing or four-wing design. Various heights of the doors are available to suit any design requirement.


Category: doors | entrances | revolving door entrances...

MasterFormat: Specialty Doors and Frames | Entrances, Storefronts, and Curtain Walls | Entrances...



Stanley Access Technologies LLC
65 Scott Swamp Road
Farmington, CT 6032
Tel: (800) 722-2377
Fax: (860) 679-6436

SAT.Info@sbdinc.com

http://www.stanleyaccess.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Stanley Rush 1500 Series: Three- or Four-Wing Manual Revolver


The 1500 Revolving door is available as a three-wing or four-wing design. Various heights of the doors are available to suit any design requirement. This revolver is fully framed with a fluted metal clad center shaft with integrated fully weather stripped narrow 1 9/16" (40mm) stiles. Our patented door wing collapsing mechanism and bearing, concealed below the floor and within the canopy ceiling, gives the stile to rail connection a clean look.
FEATURES AND BENEFITS

  • Narrow line flush glazing door and enclosure sections
  • Concealed collapsing mechanism and speed control
  • Concealed fasteners - snap-on glass stops throughout
  • Bookfold wing position factory set for emergency egress
  • Conforms to all North American building codes
  • Tested to ASTM E283 for air tightness
  • Standard and custom models available
  • Easily removed door wings provide fast and efficient service
  • Curved laminated glass in enclosure
  • Tempered glass in door wings
  • Sliding dead bolt lock
  • Standard models available in 7'-0" (2134mm) diameter or custom models ranging from (but not limited to) 6'-0" (1830mm) diameter to 9'-0" (2743mm) diameter.

OPTIONS

  • Double wall glass enclosure for air plenum and grilles
  • Cladding in stainless or bronze (see Architectural Metal Products)
  • Tinted glass (wings and enclosure )
  • Horizontal muntins
  • Curved metal panels in place of glass enclosure
  • Curved tempered glass
  • Custom designed push bars and plates. (some design limitations)
  • Canopy lighting - LED
  • Sliding dead bolt lock
  • Overhead or heavy duty floor mounted speed controls
  • Extended warranty
  • Maintenance and Service contracts available (some limitations apply)
  • Quarter-point closing
  • Sliding exterior screens


See More


Specifications

No Illustration Description Type Model
1504-001 Four-Wing Manual Revolver 4-Wing 1500
1503-001 Three-Wing Manual Revolver 3-Wing 1500
1504-002 Four-Wing Manual Revolver w/ Cladding 4-Wing 1500
1503-002 Three-Wing Manual Revolver w/ Cladding 3-Wing 1500
Sweets app for Revit – Learn More