Stanley Access Technologies LLC - Magic-Access: Low Energy Swing Door Operator

DOWNLOADS

The STANLEY Magic-Access® low energy (knowing act) operator can automate virtually any swing door, new or existing, through physical activation from a push plate, wall-switch or card reader.


Category: barrier free products | handicap accessible products | handicapped access...

MasterFormat: Specialty Doors and Frames | Traffic Doors | Door Hardware...



Stanley Access Technologies LLC
65 Scott Swamp Road
Farmington, CT 6032
Tel: (800) 722-2377
Fax: (860) 679-6436

SAT.Info@sbdinc.com

http://www.stanleyaccess.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Magic-Access: Low Energy Swing Door Operator

The STANLEY Magic-Access® low energy (knowing act) operator can automate virtually any swing door, new or existing, through physical activation from a push plate, wall-switch or card reader. Engineered to meet the most difficult applications, Magic-Access effortlessly provides a full range of automatic door functions to an otherwise manual door and is compliant with all U.S. and Canadian handicap access laws, including ANSI A117.1 and A156.19.
The operator installs on the door frame in place of a conventional closer and works with metal, wood or glass doors (hinged, offset, or pivot center) up to 44” wide. This state-of-the-art electromechanical operator works in conjunction with a sophisticated electronic controller and a variety of activating devices. The end result: quiet, smooth, automatic door control without compromising building traffic flow and architectural aesthetics. It is also available as a fire door package with UL listed equipment, for applications such as hospitals.

FEATURES AND BENEFITS

  • Powers doors up to:
    • 42” (1067 mm) in panel width
    • 125 pounds (57kg) in panel weight
  • Compact unit size for aesthetics
  • Reacts immediately to any obstacle by stopping the door at any point in its swing cycle
  • Adjustable opening force as low as 8lbs compared to the standard 15lbs required to open a typical manual swing door
  • Open under power and spring close for maximum energy efficiency
  • Retrofits to conventional doors for a fraction of the cost of a new automatic door
  • Operates from any standard 120V AC outlet with no special wiring needed
  • Acts as a mechanical closer for manual operation in the event power is shut off
  • Power Close Selectable
  • Adjustable Time Delay

OPTIONS

  • Special Finishes
  • Additional Safety Options
  • Magic-Touch™ activation for extra power assistance when used manually opening past 3°
  • Lock Delay ability
  • Sequencing Module
  • Complete factory engineered door system that includes center pivoted door panels
  • Mounting Options
    • Visible - Standard
    • Concealed
  • Activation Options
    • Wireless Push Plate
    • Wireless Transmitters
    • Push Plate Posts
    • Push to Operate


See More


Specifications

No Illustration Description
4.01 Magic-Access Low-Energy Operator on Aluminum Door
4.02 Magic-Access Low-Energy Operator on H.M./Wood Aluminum Door
Magic-Access Operator BIM Model
Specifications
HEADER SIZE: 6 1/8” (152mm) High x 4” (102) deep
SWING DOOR PANELS: Up to 42” (1067mm)
DOOR PANEL WEIGHT: Up to 125 pounds (57kg)
DRIVE SYSTEM: 1/8 HP DC Motor, Gear Drive, “Low-energy”
CONTROLLER: Solid State, Electronic, with Built in “Reverse-on-obstruction” | OPTION: Magic-Touch® Activation
ACTIVATION SENSOR OPTIONS: Mats, Motion Detectors, Radio Controls or Touch-less wave sensors
BREAKOUT: Breakaway Door Stop Available
POWER REQUIRED: 120 VAC, 5 Amps Minimum
CODE COMPLIANCE: UL, cUL, ANSI A156.19, NFPA 101, CSFM
Sweets app for Revit – Learn More