SoundGuard Soundproof Paint
THE WORLDS FIRST SOUNDPROOFING PAINT
SoundGuard’s revolutionary, patent-pending soundproof paint was specifically developed by our team to reduce and/or eliminate sound transmission through walls and ceilings.
Our high-performance architectural coating has been independently and scientifically proven to reduce sound transmission through interior walls by an average of 90% making it the closest thing to soundproof paint that has ever been created
The proprietary ingredients in our coating are able to accomplish this through isolation, absorption and deflection. Essentially we are creating an impenetrable sound barrier on the wall that is able to block the majority of decibels at any frequency.
Our soundproof paint is also eco-friendly (low-VOC) and very easy to apply using the proper equipment.
Through independent testing we have achieved an FSTC rating of 52 which when applied to any wall or ceiling would provide a tremendous amount of sound protection.
SOUNDGUARD MOCKUP WITH APPLICATION & SOUND TESTING RESULTS
Introducing our revolutionary, eco-friendly noise reduction coating that has been independently and scientifically proven to reduce sound transmission through interior walls by up to 90% making it the closest thing to soundproof paint that has ever been developed.
SoundGuard’s high-performance, patent-pending coating is not only effective, affordable, easy to apply and non-invasive but it’s also fire resistant, mold resistant and mildew resistant.
This means that SoundGuard is the perfect soundproofing solution for your commercial or residential property.
To speak with a member of our sales team call us at 800-955-3991 or email us at email@example.com
Our soundproof paint is very easy to apply, however it should always be done by one of our preferred contractors with the proper equipment and training.
All surfaces being treated should be dry and clean of any loose debris.
Our standard application is 3 coats of 22-23 wet mils per coat for a total of 68 wet mils.
Our product is 45-46% solids and 54-55% liquids which means after the 3 coats of product is done drying and curing you will have approximately 30 dry mil on the wall which is the equivalent to the thickness of a credit card.
We require a 1.5 horsepower airless sprayer with a .519 tip. We require painters to be wearing the proper eye wear and respirators.
We recommend that oscillating fans and dehumidifiers be placed near the treated walls to assist with the drying process.
Typically 2 hours of dry time is enough time between coats however with good air flow the drying process may be even shorter.
Ionizers will help eliminate the reminiscence of paint odor. Without ionizers the paint odor should be completely gone within 24 hours of the last coat being applied.
WHY USE SOUNDGUARD?
LEVEL 5 FINISH