Solomon Colors, Inc. -Sealers and Additives

DOWNLOADS

Sealers and Additives Sealers are an imperative part of a long lasting and beautiful decorative concrete surface. Simple integrally colored slabs, intricately stamped patios,...


Category: concrete flooring | deck coatings | strippers...

MasterFormat: Maintenance of Concrete | Common Work Results for Concrete | Concrete Finishing...



Solomon Colors, Inc.
4050 Color Plant Road
Springfield, IL 62702
Tel: (800) 624-0261
Fax: (800) 624-3147

sgs@solomoncolors.com

http://www.solomoncolors.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Sealers and Additives

Sealers are an imperative part of a long lasting and beautiful decorative concrete surface. Simple integrally colored slabs, intricately stamped patios, overlaid sidewalks, and stained interior floors all need a quality sealer to be the best they can be for as long as they can. Low-build and high-build sealers, water-based and solvent-based sealers, cure and seals: any and all of these have a place in your project, protecting from liquid penetration, resisting wear, and improving color. Brickform sealer additives can matte, color, protect, and add traction to sealers, as well.


Sealers and Additives

DECOPOXY DecoPoxy

BRICKFORM DecoPoxy is a water-based, low VOC, penetrating epoxy coating that has been specifically formulated to protect interior commercial or residential cementitious floors. It provides a high gloss, wear and chemical resistance, and an easy to maintain finish, while bringing up the full depth of color on acid stained or decorative floors.

  • Helps prevent delamination
  • Non-flammable, low-odor and toxicity
  • Superior chemical resistance
  • Easy to recoat


Sealers and Additives

PA Poly-Astic

Premium, High-Build, Poly-Aspartic Sealer - Zero VOC

BRICKFORM Poly-Astic is a two-part high solids, durable, and high gloss sealer designed for interior use on concrete or masonry surfaces. Poly-Astic is designed for two coat application resulting in a water clear finish. Poly-Astic provides an extremely durable finish ideal for commercial or residential interior concrete flooring. Poly-Astic does not yellow or deteriorate under UV rays. It is highly resistant to most chemicals and will greatly increase the service life of concrete and concrete overlay flooring.

  • Non-yellowing, crystal clear
  • Interior use only
  • Enhances color
  • Easy to apply


Sealers and Additives

UMS Uremax Concrete Sealer

BRICKFORM UreMax WB is a two-part, matte-finish, water-based polyurethane that forms a high-solids coating. UreMax WB preserves and protects any above-grade concrete, masonry or stone. It is the most durable, chemical-resistant barrier coating of the BRICKFORM sealers, without the odor typically found in solvent-borne sealers.

Formulated to seal and protect concrete and masonry that is subject to heaviest use conditions, BRICKFORM UreMax WB is chemically resistant and highly durable.

  • UMS Uremax Concrete Sealer
  • UMS-1 Uremax Concrete Sealer Kit
  • UMS-4 Uremax Concrete Sealer Kit


Sealers and Additives

GCS Gem Cure and Seal

BRICKFORM Gem Cure & Seal is a solvent based, clear acrylate copolymer curing compound, dust proofer and sealer all in one. Gem Cure & Seal minimizes moisture loss from evaporation in newly placed concrete to provide maximum strength, hardness and protection. Reducing water evaporation loss will result is a stronger, denser, more durable concrete with higher compressive strength, and better crack and freeze-thaw resistance.

  • Interior/Exterior
  • Can Be Colored & Stained
    • GCS Gem Cure and Seal
    • GCS-10018 Gem Cure and Seal 309 – 100 VOC
    • GCS-35018 Gem Cure and Seal 309 – 350 VOC
    • GCS-35025 Gem Cure and Seal 1315 – 350 VOC
    • GCS-65025 Gem Cure and Seal 1315 – 650 VOC


Sealers and Additives

SCS Satin Cure & Seal

BRICKFORM Satin Cure & Seal Satin Cure & Seal is a water based, clear acrylic co-polymer curing compound, dust proofer and sealer all in one. Satin Cure & Seal minimizes moisture loss from evaporation in newly placed concrete to provide maximum strength, hardness and protection. Reducing water evaporation loss will result is a stronger, denser, more durable concrete with higher compressive strength, and better crack and freeze-thaw resistance.

  • SCS Satin Cure and Seal
  • SCS-10018 Satin Cure and Seal 309
  • SCS-10025 Satin Cure and Seal 1315


Sealers and Additives

ST Stealth-Seal

BRICKFORM Stealth-Seal is non-film forming water and oil repellent that effectively protects and preserves the natural appearance of any surface it’s applied on. Stealth-Seal works by creating an invisible barrier at the surface level through a chemical reaction between the sealer and the cement paste, it allows vapor transmission while strongly repelling water and oil, this qualities make Stealth-Seal ideal for any surface that needs protection from stains and the elements. Stealth-Seal may be applied to a variety of natural materials, concrete and any cementitious surface. Use Stealth-Seal Premium, for added protection and longer lasting performance.


Sealers and Additives

GS Gem-Seal

BRICKFORM Gem-Seal is a high-gloss, solvent-based, non-yellowing sealer. A light coating of this UV-resistant sealer will protect and enhance colored and textured concrete. Use BRICKFORM Gem-Seal on porous concrete and masonry to form a shield against stains and mildew.

  • Non-Yellowing, Crystal Clear
  • Dries To A “Wet-Look” Finish
  • Interior/Exterior Use
  • Enhances Color
    • GS Gem-Seal
    • GS-1 Gem-Seal 400 VOC – 1 Gallon Can
    • GS-5 Gem-Seal 400 VOC – 5 Gallon Pail
    • GS1-100 Gem-Seal 100 VOC – 1 Gallon Can
    • GS5-100 Gem-Seal 100 VOC – 5 Gallon Pail
    • GS1-700 Gem-Seal 700 VOC – 1 Gallon Can
    • GS5-700 Gem-Seal 700 VOC – 5 Gallon Pail


Sealers and Additives

MS Safety-Seal

BRICKFORM Safety-Seal with Traction-Grip, Low-Sheen Sealer - 400 VOC or 100 VOC BRICKFORM Safety-Seal is designed to be slip-resistant and is ideal around pool decks and areas where water or moisture can accumulate. Safety- Seal is a solvent-based sealer that protects concrete surfaces from stains and mildew. BRICKFORM Safety-Seal dries to a beautiful matte finish that is UV-resistant.

  • Lacquer Based
  • Dries To A Low-Sheen Finish
  • Interior/Exterior Use
  • Micronized Slip-Resistant Additives
    • MS Safety-Seal
    • MS-5 Safety-Seal 400 VOC – 5 Gallon Pail
    • MS5-100 Safety-Seal 100 VOC – 5 Gallon Pail


Sealers and Additives

PS Poly-Seal

BRICKFORM Poly-Seal, High-Sheen “Wet-Look” Sealer - Is sold as 100VOC 400VOC and 650 VOC BRICKFORM Poly-Seal is a high-gloss, solvent-based, super-tough acrylic sealer that is easy to clean and maintain. Poly-Seal protects with a UV-resistant coating that penetrates the surface to retard efflorescence and resist oil, grease and food stains.

Non-Yellowing, Crystal Clear

Dries to a High-Sheen Finish

Interior and Exterior Use

Enhances Color

Only Available in Some Markets

  • PS Poly-Seal
  • PS-1 Poly-Seal – 1 Gallon Can
  • PS-5 Poly-Seal – 5 Gallon Pail
  • PS1-400 Poly-Seal 400 VOC – 1 Gallon Can
  • PS5-400 Poly-Seal 400 VOC – 5 Gallon Pail
  • PS1-100 Poly-Seal 100 VOC – 1 Gallon Can
  • PS5-100 Poly-Seal 100 VOC – 5 Gallon Pail


Sealers and Additives

SS-5 Satin-Seal

BRICKFORM Satin-Seal, Satin-Finish “Natural-Look” Sealer - 100 VOC BRICKFORM Satin-Seal is a non-flammable product, designed to protect concrete with a satin finish. This water-based acrylic VOC-compliant sealer reduces the effect of efflorescence on porous surfaces, while forming a nonyellowing, scuff-resistant finish that resists moisture penetration.

  • Non-Yellowing
  • Dries To Stain-Finish
  • Interior/Exterior Use
  • Scuff-Resistant


Sealers and Additives

DW Premium Acrylic Floor Finish

BRICKFORM Premium Acrylic Floor Finish is an acrylic wax that forms a long-lasting protective coating over a BRICKFORM sealer. Premium Acrylic Floor Finish provides wear-resistant sacrificial coating. Premium Acrylic Floor Finish stands up to the heaviest of traffic conditions. It is easily applied and can be re-coated up to 100 times without having to strip the floor. It will not powder and it can be mopped or cleaned time after time without damaging its original shine. BRICKFORM Premium Acrylic Floor Finish is ideal for ongoing maintenance.

Super-Tough Film

Semi-Gloss

Interior Use Only

Slip-Resistant

  • DW Premium Acrylic Floor Finish
  • DW-1000 Premium Acrylic Floor Finish 1 Gallon Bottle
  • DW-5000 Premium Acrylic Floor Finish 5 Gallon Bucket


Sealers and Additives

MM Matte-Magic

BRICKFORM Matte-Magic, Gloss Reducing Additive BRICKFORM Matte-Magic is a powdered flattening agent additive for Brickform solvent based sealers. The original topcoat gloss is reduced based on the amount of additive used. The finished gloss reflectance can be varied from semi-gloss to satin. Matte-Magic comes in 16 oz units, with cases of 8 units. Each unit is added to a 5 gallon sealer for gloss reduction.

  • Effectively Reduces Gloss
  • Reduced Reflectance Helps Distinguish Floor Color
  • Solid Additive Is Easy To Measure And Mix
  • Additive Does Not Affect Viscosity
  • More Effective Than Liquid Matte Magic


Sealers and Additives

TAS Tinta' Seal

BRICKFORM Tinta’ Seal is a coloring agent that when added to BRICKFORM solvent-based sealers will produce a solid/opaque colored sealer for concrete surfaces. The Tinta’ Seal when mixed and applied over properly prepared concrete allows the user to color and seal with one product.


Sealers and Additives

TG Traction Grip

BRICKFORM Traction Grip™ Traction Grip is an anti-slip micronized powder that adds texture to decorative sealers (BRICKFORM Gem-Seal, Poly-Seal, and Satin Seal). The lightweight spherical shape and clarity gives Traction Grip its specific properties. Applications include inclined driveways, garages, steps, patios and pool decks.

  • No Sharp Edges
  • Disperses Easily
  • Does Not Affect Color

Use the Project Calculator to estimate the product needed for your project.

Use Where to Buy to find a BRICKFORM distributor.


Sealers and Additives

SR Strip-It

BRICKFORM Strip-It™ BRICKFROM Strip-It is an environmentally sound and user-safe stripper for solvent-based sealers and paints. Strip-It may be used on all masonry surfaces including concrete, quarry tile, ceramic tile, terrazzo, cementitious overlays and other surfaces. Strip-It meets 2005 California Air Resources Board V.O.C. standards (less than 50% V.O.C. by weight).

Non-Flammable

Contains No Methylene Chloride

  • SR Strip-It
  • SR-1 Strip-It – 1 Gallon
  • SR-5 Strip-It – 5 Gallon

Solomon Colors, Inc.
4050 Color Plant Road,
Springfield, IL 62702
Tel: (217) 522-3112
Fax: (800) 624-3147
Tollfree: (800) 624-0261
E-mail: sgs@solomoncolors.com
Web site: http://www.solomoncolors.com





Sweetsstakes