Sikaplan Pre/Post Applied Loose-Laid Membrane - Sikaplan® WP Tape-200

Termination, fixing and sealing tape for Sikaplan® WP membrane systems

Sikaplan® WP Tape-200 is a PVC based waterproof sealing tape with modified properties for terminations and fixings of Sikaplan^® WP membranes.

• Good adhesion to most substrates
• Long-term water resistance under hydrostatic pressure
• Optimised workability, hot air weldable
• Flexible with high tensile strength and multi-axial elongation
• Flexible in cold temperatures
• Prevents lateral water underflow

Usage

• As a waterproofing sealing tape that is heat weldable to PVC based Sikaplan® WP waterproofing membranes
• Connect Sikaplan® WP membranes to the substrate and seal edges and terminations
• Waterproofing tunnel cross-sections requiring high performance, secure terminations of the Sikplan® WP Membrane System

Advantages

• Good adhesion to most substrates
• Long-term water resistance under hydrostatic pressure
• Optimised workability, hot air weldable
• Flexible with high tensile strength and multi-axial elongation
• Flexible in cold temperatures
• Prevents lateral water underflow

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

• Hydrostatic Pressure Resistance Test over 245 days Sikaplan® WP Tape-200, MFPA, Test report No. B 16.14.047.06

Product Information

Chemical Base

Polyvinylchloride (PVC-P)

Thickness

2.0mm (0%/+10%)

Shelf Life

18 months from date of production

Storage Conditions

Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between +5°C (40°F) and +35°C (95°F). Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.

System Information

System Structure

The Sikaplan® WP Tape-200 system consists of a modified PVC tape and a choice of Sika epoxy adhesives for bonding.

The following system products must be used:

Tape

Sikaplan® WP Tape-200 (width: 200 mm)

Adhesives

Suitable adhesives are:

• Epoxy 7300
• Sikadur®-31 HiMod

Ancillary Products:

• Sikaplan® WP Membrane Systems
• Sarna Seam Cleaner

Compatibility

Compatible with Sikaplan® WP 1100 / 1130 / 2101 / 2110 Series of membranes

Technical Information

Service Temperature

-10 °C (14°F) min. / +35 °C (95°F) max.

Application

Application Information

Ambient Air Temperature

+5 °C (40°F) min. / +55 °C (131°F) max.

Substrate Temperature

Refer to Epoxy 7300 or Sikadur® epoxy adhesive temperatures

Application Steps

APPLICATION INSTRUCTIONS

Refer to the relevant section in the Sika® Method Statement: Waterproofing of Cross Passages with Sikaplan® WP Tape-200.

See More

See Less