SFS Group -1/4" Impax™ SD5 Metal Self-Drill Screw, HWH, SD5-14

Features and Benefits

Precision cold forged point assuring superior strength and the fastest drilling time performance
Designed to have low driving and thread engagement torque and provide maximum clamp load

Category: screws | self-drilling fasteners | self-drilling screws...

MasterFormat: Common Work Results for Metals | Metal Fastenings

SFS Group
1045 Spring Street
Wyomissing, PA 19610
Tel: (800) 234-4533
Fax: (888) 485-4225

Overview

1/4" Impax™ SD5 Metal Self-Drill Screw, HWH, SD5-14

Features and Benefits

Precision cold forged point assuring superior strength and the fastest drilling time performance
Designed to have low driving and thread engagement torque and provide maximum clamp load
Available with no sealing washer or with bond seal washer
Corrosion resistant coating system

Application

Insulated metal panel to medium and heavy gauge metal application

Guidance

Install fasteners with 0-2000 rpm screw gun equipped with depth sensing nose piece.
Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
Use of impact guns or hammer drills is not recommended.

Specifications

Drive Socket	3/8" Hex
Product Type	Self-drilling screw
Diameter	1/4"
Diameter [mm]	6.2 mm
Drill Capacity Max [Inches]	0.500"
Drill Capacity Range [mm]	2.7 mm-12.7 mm
Drill Point	SD5
Head Style	Hex Washer head
Material	Carbon steel
Thread Major Dia	0.245"
Thread Major Dia [mm]	6.2 mm
Thread Minor Dia	0.192"
Thread Minor Dia [mm]	4.9 mm
Threads Per Inch	20
Washer	19/32" Galvanized bond seal-No washer