Ray-Bar Engineering Corporation - X-Ray Safety Lead Glass

Ray-Bar X-Ray Safety Glass is federal and medical building safety code compliant and always readily available as permanently labeled. Our x-ray lead glass provides the required impact resistance for door vision-lites, in walls within 24" of a door opening, in high risk traffic areas, and for...


Category: cast glass | lead glass | radiation protection...

MasterFormat: Radiation Shielding Windows | Mirrored Glass Glazing | Radiation-Resistant Glazing...



Ray-Bar Engineering Corporation
697 W. Foothill Blvd.
P.O. Box 415
Azusa, CA 91702 -0415
Tel: (800) 444-9729
Fax: (800) 333-9729

sales@raybar.com

http://www.raybar.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



X-Ray Safety Lead Glass

X-Ray Safety Lead Glass

  • Over 40 standard sizes and all custom sizes available up to 48" x 96"
  • Permanently labeled ANSI Z97.1 and CPSC 16 CFR 1201 Cat II requirements for impact resistance as required per IBC 2406 "Safety Glazing"
  • 2 to 4 working day standard fabrication
  • Many protective shielding levels available
  • Available with lead lined frames for wall or door applications

Ray-Bar X-Ray Safety Glass is federal and medical building safety code compliant and always readily available as permanently labeled. Our x-ray lead glass provides the required impact resistance for door vision-lites, in walls within 24" of a door opening, in high risk traffic areas, and for additional seismic safety, providing a clear view while additionally shielding X-Ray/Gamma radiation, and 95% of UV protection.

Ray-Bar impact resistant x-ray safety glass is utilized "to reduce or minimize the likelihood of cutting or piercing injuries when said glazing is broken by human contact". Per ANSI Z.97.1-2009

*Ray-Bar X-Ray Safety Glass is NOT fire-rated, tempered, impact proof, shatter proof or scratch resistant. Fire-rated designs are available upon request.

Per ANSI Z.97.1 and CPSC 16 CFR 1201 Category 2 standards, any x-ray control window occurring within 24" of a door opening and any vision lite window occurring in a shielded door must have impact resistant X-Ray Safety Glass and be permanently labeled as meeting these required impact resistant standards.

Please Note: X-Ray Lead Glass cannot be tempered as it is physically impossible due to its low melting temperature and surface characteristics. It will not survive the thermal tempering process or accept a chemical salt bath regardless of the manufacturer; however X-Ray Lead Glass is NOT REQUIRED by any safety code to be "tempered". The good news is that Ray-Bar X-Ray Safety Glass meets all current glass safety codes for impact resistance and is permanently labeled accordingly as per ANSI Z97.1 and CPSC 16 CFR 1201 Cat 2 and IBC 2406 requirements for hazardous locations indoors and this is particularly applicable in a medical facility environment.

X-RAY SAFETY GLASS STOCK SIZES

(Typically available 2 to 3 Days)

8" x 8"24" x 24"40" x 40"
8" x 10 "24" x 30"40" x 48"
10" x 10"24" x 36"40" x 60"
10" x 12"24" x 48"40" x 72"
12" x 12"24" x 60"40" x 84"
12" x 16"24" x 72"40" x 96"
12" x 24"30" x 30"42" x 42"
12" x 36"30" x 36"42" x 48"
12" x 48"30" x 48"42" x 60"
16" x 16"30" x 60"42" x 72"
16" x 24"30" x 72"42" x 84"
16" x 36"36" x 36"42" x 96"
16" x 48"36" x 42"48" x 48"
18" x 18"36" x 48"48" x 60"
18" x 24"36" x 60"48" x 72"
18" x 30"36" x 72"48" x 84"
18" x 36"36" x 84"48" x 96"
18" x 48"36" x 96" 
  • Circles or discs are also available
  • X-Ray lead glass is not tempered or fire rated
  • Maximum size available in a single pane is 48" x 96"
Thickness: 5/16" +(7.0mm to 8.5mm)
Lead Content: 55% to 65% Pb
Lead Equiv.(mm) nominal: 1.8mm to 2.4mm
Lead Equiv.(in) nominal: .0625" to .094"
Lbs. lead equiv./ft' (Range): 4.0 to 6.0 Lead Equiv
Weight - Lbs. / ft2 (Approx.): 8.0+ with +/- 0.5mm
Cutting Size Tolerance (in): +/-1/8" (0.125")
Standard Edgework: Seamed
*Higher Lead Shielding Levels Available Upon Request


X-Ray Safety Glass is also available in lead equivalencies of 2.4mm, 3.2mm and 3.7mm. We provide lead glass blocks up to 4" thick for high energy isotope or gamma radiation shielding. Edge work available as standard clean-cut and seamed, also available as beveled, ground or polished upon request. Please contact us for special requirements and special designs.

Ray-Bar Engineering Corporation
697 W. Foothill Blvd.
P.O. Box 415
Azusa, CA 91702-0415
Tel: 1(800) 444-XRAY, 1(800) 444-9729
Fax: 1(800) 333-XRAY, 1(800) 333-9729
E-mail: sales@raybar.com
Web site: http://www.raybar.com





Sweets app for Revit – Learn More