Rapid Floor® Systems - Rapid Floor Ultra Gypsum Underlayment

For new construction or renovation, it's hard to match Rapid Floor Ultra's impressive list of application benefits. For reliably superior results, count on Rapid Floor Ultra to: Rapid Floor ® Ultra is always a 'green' building material. Code Listings: 'Green' Information: Rapid Floor ® Systems...


MasterFormat: Cast Underlayment | Underlayment | Acoustic Underlayment...



Rapid Floor® Systems
920 Hamel Road
P.O. Box 253
Hamel, MN 55340
Tel: (800) 356-6720
Fax: (763) 478-9695

info@rapidfloor.com

http://www.rapidfloor.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Rapid Floor Ultra Gypsum Underlayment

Rapid Floor Ultra Gypsum Underlayment

Ultra Strong, Ultra Fast. Rapid Floor® Ultra gives you the Ultimate Edge.

For new construction or renovation, it's hard to match Rapid Floor Ultra's impressive list of application benefits. For reliably superior results, count on Rapid Floor Ultra to:

  • Cap uneven, rough, cracked or spalled concrete
  • Level entire floors or transition areas, featheredge to deepfill
  • Resurface old or damaged concrete floors
  • Perform up to 4000 PSI (27 MPa)
  • Resist water absorption
  • Fill voids in concrete floors
  • Top precast planks
  • Install right over old floor coverings, including vinyl asbestos tile
  • Provide fire and sound control over wood frame construction
  • Install above, on or below grade
  • Require no troweling
  • Provide a temporary wear surface just 2-4 hours after application
  • Exceed standards set by leading floor goods manufacturers

Rapid Floor® Ultra is always a 'green' building material.

Code Listings:

  • ESR-2540
  • UL ER 8477-01
  • ESR-1153
  • ESR-1141
  • ESR-1774
  • HUD951i
  • GREENGUARD Certified
  • GREENGUARD Gold Certified


Rapid Floor® Ultra Technical Data Sheet


Compressive
Strength Range
2500-4000 psi
(17.2-27.4 MPa)
Installed Weight
3/8" (10 mm) = 3.5 lb/ft²
(15.9 kg/m²)
1" (25 mm) = 9.2lb/ft²
(42.4 kg/m²)
Dry Density
115-120 lbs/ft³
(1840-1900 kg/m³)
K-Factor
5.2 Btu · in/hour-°F-ft²
(.74 W/[m• °C])
Specific Heat
0.25 Btu/lb- °F
(.94 kJ[kg• °C])
Surface Burning
Characteristics
Flame spread: 0
Fuel contributed: 0
Smoke Density: 0
Point Loading
Typical loading of up to
3500 lbs. (1590 kg) on a
1" (25.4 mm) dia. disk @ 0.007" max. indentation


'Green' Information:

Sample USGBC LEED Credit Areas*
Project
Credit
Category
Environmental QualityEQ 2Low Emitting Materials
EQ 4Indoor Air Quality Assessment
EQ 9Acoustic Performance
Materials & ResourcesMR 3Building Product Disclosure
and Optimization - Sourcing
Raw Materials

Rapid Floor® Systems
920 Hamel Road
P. O. Box 253
Hamel, MN 55340
Tel: (763) 478-9655
Fax: (763) 478-9695
Tollfree: (800) 356-6720
E-mail: info@rapidfloor.com
Web site: http://www.rapidfloor.com





Sweets app for Revit – Learn More