Rapid Floor® Systems - Maxxon® MVP (Moisture Vapor Protection)

Maxxon ® MVP (Moisture Vapor Protection) is a unique 2-component, moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor and moisture through concrete floors and walls on or below grade. Maxxon MVP eliminates delamination of adhesives, floor...


Category: under slab vapor retarders | under-slab vapor barriers | under-slab vapor retarders...

MasterFormat: Sheathing | Underlayment | Dampproofing...



Rapid Floor® Systems
920 Hamel Road
P.O. Box 253
Hamel, MN 55340
Tel: (800) 356-6720
Fax: (763) 478-9695

info@rapidfloor.com

http://www.rapidfloor.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Maxxon® MVP (Moisture Vapor Protection)

Maxxon® MVP (Moisture Vapor Protection)

Maxxon® MVP (Moisture Vapor Protection) is a unique 2-component, moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor and moisture through concrete floors and walls on or below grade. Maxxon MVP eliminates delamination of adhesives, floor coverings and coatings. Maxxon MVP also prevents capillary infiltration of oil or other chemicals from the ground and can be used to treat oil contaminated slabs.

  • Reduces moisture vapor emission
  • 1-coat application
  • Underlayment system installed next day
  • Applied to moist or dry concrete
  • High alkalinity barrier


Maxxon® DPM Technical Data Sheet


Material
2-component epoxy
Color
Clear
Density
9.08 lbs/gal (1.09 ± 0.02 kg/L)
VOC Content, mixed
.0 lbs/gal (0 g/L)
Flash Point
                                Part A:
                                Part B:

>212°F (>100°C)
>248°F (>120°C)
Volume Solids
100%
Pot Life, approx
35 Minutes at 85°F (30° C)
Open to Foot Traffic
after 12 hrs at 73°F (23° C)
Curing Temperature
minimum 50°F (10° C)
Full Strength
after 7 days at 73°F (23° C)


Adhesion to:
-dry concrete (7 d):
(ASTM D-4541)


500 psi (3.5 MPa)
All data are average values obtained under laboratory conditions.
In practical use temperatures, humidity and absorbance of the substrate may influence the above given values.

Rapid Floor® Systems
920 Hamel Road
P. O. Box 253
Hamel, MN 55340
Tel: (763) 478-9655
Fax: (763) 478-9695
Tollfree: (800) 356-6720
E-mail: info@rapidfloor.com
Web site: http://www.rapidfloor.com





Sweets app for Revit – Learn More