E-Standard - Wall Mounted Standards
An extruded aluminum wall standard designed to be recessed mounted between 5/8″ drywall panels. The front flanges cover the rough-cut edge of the drywall.
WALL MOUNTED STANDARDS Features
Rakks Wall Mounted Standards are made of extruded aluminum with precision channels that accept Rakks Shelf Support Brackets. Standards are available in six profiles to meet a variety of surface and recess mounted applications.
Standards can be specified in any length up to 12′. Standards come with drilled and countersunk holes to accept color matched mounting screws (No. 6 x 1-1/4” Philips flat-head), which are included. When properly installed, screw heads are flush with the back of the channel allowing shelf brackets to be positioned at any point.WALL MOUNTED STANDARDS Requirements
We suggest a maximum spacing of 32″ for most applications. For heavy loads shorter spans may be required. Note: Specified spacing should be determined by the weight capacity of the brackets and the strength of the shelf.
Standards must be screwed into studs, blocking, or into wall anchors sized for No. 6 screws. Toggler® Brand AF-6 wall anchors are recommended. Brackets should be mounted at least 6″ from the top of the standard to better distribute the load. Shelf brackets can be mounted at the very bottom of a standard.