RT Technologies Inc - Laser Beam Shutters

DOWNLOADS

The LS- range of laser beam shutters are combined shutters and beam dumps designed to be driven by a safety control system such as the Lasermet ICS-6 laser interlock control system, for use as a means of shutting down the laser beam automatically during unauthorized access...


Category: electronic controls | laboratory equipment | laser products...

MasterFormat: Safety Specialties | Laboratory Equipment | Process Control and Enterprise Management Systems...



RT Technologies Inc
2391 Briarleigh Way
Dunwoody, GA 30338
Tel: (770) 332-0092
Fax: (770) 332-0092

contact@rtlasersafety.com

https://www.rtlasersafety.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Laser Beam Shutters

The LS- range of laser beam shutters are combined shutters and beam dumps designed to be driven by a safety control system such as the Lasermet ICS-6 laser interlock control system, for use as a means of shutting down the laser beam automatically during unauthorized access, or manually when the beam is not required. They can also be used as stand-alone shutters for manual or remote switching of the beam, or are available as OEM components for laser or laser product manufacturers.



Operating Voltage

All shutters work from 12 VDC (11 – 14 VDC). However, if your supply is 18, 24 VDC or similar, request the LS voltage converter (part no.LS-VC-24.12) which enables operation from 15 – 35 VDC.

Operating Logic

The shutters will not open unless power is supplied. When power is supplied a yellow LED lights to indicate that power is present. A green LED will also light indicating that the shutter is fully closed. To open the shutter, the green button must be pressed. The green LED will go out and an orange LED will light indicating that the shutter is fully open. The shutter can be closed by pressing the red button or by cutting the power.


See More

Features
  • Gravity fed for fail safe operation

  • Combined shutter and beam dump for added safety

  • High quality engineering design

  • Specially designed for compatibility with safety control systems

  • LED shutter status indication (output available for remote indication)

  • Interlocked safety shutdown or manual operation

  • Safety latch prevents accidental beam switch on

  • Remote switching option

  • Low current requirement

  • Also available as OEM product


Specifications

LS 10-12 and 100-12 Shutter Specifications
Model Max laser power (W) Aperture Size (mm) Drive voltage (V DC) Drive voltage with LS-VC-24.12 (V DC) Current consumption (mA) Size (mm)
LS-10-12 20 15 11 – 14 15 – 35 150 98 x 63.5 x 36*
LS-100-12 200 50 11 – 14 15 – 35 150 130 x 150 x 140 *
Laser Beam Shutters
Sweets app for Revit – Learn More