Precision Ladders, LLC - Aluminum Alternating Tread Stairs

DOWNLOADS

Precision’s Aluminum Alternating Tread Stair is an alternative to a traditional ships stair, and allows a climber to descend face-forward giving a clear view of the floor below. Precision’s Aluminum Alternating Tread Stair is an alternative to a traditional ships stair. These stairs allo


Category: equipment ladders | rooftop access ladders | safety ladders...

MasterFormat: Metal Fabrications | Alternating Tread Stairs | Metal Ladders...



Precision Ladders, LLC
P.O. Box 2279
Morristown, TN 37816
Tel: (800) 225-7814
Fax: (423) 586-2091

Matt@PrecisionLadders.com

http://www.precisionladders.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Aluminum Alternating Tread Stairs

Precision’s Aluminum Alternating Tread Stair is an alternative to a traditional ships stair, and allows a climber to descend face-forward giving a clear view of the floor below.

Precision’s Aluminum Alternating Tread Stair is an alternative to a traditional ships stair. These stairs allow the user to descend face-forward giving a clear view of the floor below. Precision Ladders' AT series of aluminum Alternating Tread Stairs were designed with tubular siderails to provide maximum structural integrity while keeping the overall stair weight to a minimum. As with all Precision's products, these stairs are built to project conditions and shipped to the job site completely assembled ready for installation.

Some important characteristics are:

  • All components shall be aluminum alloy 6000 (6005-T5 typical)

  • 1000 pound load capacity

  • Stringers are 3" x 2" x 1/8" aluminum tubular siderails and a 10" x 1/4" center stringer

  • Treads are aluminum bar grating

  • Available in either 56° or 68° angle of incline

  • Mill Finish is standard; anodized or powder coated are optional finishes

  • Optional 42" handrail extension (walk-thru) for accessing platform, landings, or other elevated work surfaces. Width of 24" for roof hatch access, 28" for walk-thru models.

Special applications:
"Crossover" or bridge stairs, a landing platform at top or between 2 stairs.


See More


Sweets app for Revit – Learn More