Petersen Aluminum Corporation - PAC-TITE WT Fascia

DOWNLOADS

The PAC-TITE line of roof edge systems provide unmatched uplift protection for single-ply and built up/modified roof systems. Combining superior strength and aesthetics with ease of installation, PAC-TITE fascias offer the ideal solution in a wide variety of roof edge applications.


Category: eave fascias | membrane roof accessories | roof accessories...

MasterFormat: Roof and Wall Specialties and Accessories | Manufactured Gravel Stops and Fasciae | Roof Accessories



Petersen Aluminum Corporation
1005 Tonne Road
Elk Grove Village, IL 60007
Tel: (800) 722-2523
Fax: (800) 722-7150

info@pac-clad.com

https://www.pac-clad.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


PAC-TITE WT Fascia

The PAC-TITE line of roof edge systems provide unmatched uplift protection for single-ply and built up/modified roof systems. Combining superior strength and aesthetics with ease of installation, PAC-TITE fascias offer the ideal solution in a wide variety of roof edge applications.

PAC-TITE WT Fascia has been specifically designed to meet architectural and industry demands to allow for the smaller face height in heavier gauge covers, such as .050 and .063 aluminum.

A non-penetrating design eliminates the need for stripping in and heat welding, maintaining the watertight integrity of the installation. PAC-TITE WT Fascia features an extruded aluminum anchor bar to securely terminate the membrane. The bar is readily available to dry-in the roof structure for added installation flexibility.

Two Versions Available

Both versions of PAC-TITE WT Fascia are available and have been extensively tested to meet ANSI-SPRI ES-1 Standard to comply with the International Building Code:

  • Fully Adhered/Mechanically Attached Single-Ply (FA)
  • Built-Up/Modified (BUM)

Additionally, PAC-TITE WT Fascia is backed by a Lifetime 215 mph wind warranty to ensure long-term, worry-free performance.

PAC-TITE WT Fascia features pre-punched holes which not only provide quicker installation for labor savings, but are slotted to allow for thermal movement for guaranteed long-term performance. Interlocking, concealed splice plates prevent splice plate migration for a more architecturally pleasing finish. Competitively priced, PAC-TITE WT Fascia’s installed cost can be as economical as local fabrication while ensuring specification details are met.

Offering a wide range of factory-fabricated accessories such as miters, scuppers and drainage components, Petersen Aluminum provides the complete system to ensure a clean, sure-fitting product while eliminating the need for field fabrication.

Materials:
  • 29 Stocked PAC-CLAD Finishes – .050 Aluminum
  • 6 Stocked PAC-CLAD Finishes - .063 Aluminum
  • Mill Finish Aluminum - .050 & .063 Aluminum
  • Clear and Colored Anodized - .050 & .063 Aluminum
  • 14 Stocked PAC-CLAD finishes - 22 GA Steel
    • ANSI/SPRI/FM 4435/ES-1 Standard to comply with the International Building Code

    A Lifetime 215 mph warranty is available. It covers replacement or repair of any portion of the roof edge system that has failed due to a defect in the supplied materials. The warranty covers the roof edge for the lifetime of the roof on which it was originally installed.


    See More

    Features
    • Superior, efficient design for ease of installation

    • Extensively tested for reliable, long-term performance

    • Welded corners and scuppers available (for aluminum products only)

    • Wide variety of colors and finishes

    • Pre-punched, slotted holes for precise fastener placement

    • Non-penetrating design maintains watertightness integrity

    • Reusable and recyclable material

    • Custom and radius capabilities available


    Sweets app for Revit – Learn More