Petersen Aluminum Corporation - PAC Extended Snap Edge Fascia

DOWNLOADS

With PAC Extended Snap Edge Fascia, outstanding protection against wind up-lift damage for flat roof installations meets superior economy and ease of installation.


Category: eave fascias | membrane roof accessories | roof accessories...

MasterFormat: Roof and Wall Specialties and Accessories | Manufactured Gravel Stops and Fasciae | Roof Accessories



Petersen Aluminum Corporation
1005 Tonne Road
Elk Grove Village, IL 60007
Tel: (800) 722-2523
Fax: (800) 722-7150

info@pac-clad.com

https://www.pac-clad.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


PAC Extended Snap Edge Fascia

With PAC Extended Snap Edge Fascia, outstanding protection against wind up-lift damage for flat roof installations meets superior economy and ease of installation. PAC Extended Snap Edge is the ideal solution for keeping roof edge projects on schedule and on budget while meeting the rigorous standards of ANSI/SPRI ES-1 standards.

Available in face heights up to 12 1/2″, the extended profile allows for extra coverage over multiple nailers while eliminating the use of extenders.

Installation is fast and easy, featuring a snap-on cover to eliminate field crimping, and an efficient non-penetrating design that does not require stripping in or heat welding. The product is produced in 12′ lengths for an estimated 20% – 40% savings in material handling over the typical 8′ and 10′ lengths.

Two Versions Available

Both versions of PAC Extended Snap Edge are available, in .050 and .063 aluminum:

  • Fully Adhered/Mechanically Attached Single-Ply (FA)
  • Built-Up/Modified (BUM)

PAC Extended Snap Edge features pre-punched holes which not only provide quicker installation for labor savings, but are slotted to allow for thermal movement for guaranteed long-term performance. Competitively priced, PAC Extended Snap Edge ensures a consistent, high quality, low-cost factory engineered product on every project.

Offering a wide range of factory-fabricated accessories such as miters, scuppers and drainage components, Petersen Aluminum provides the complete system to ensure a clean, sure-fitting product while eliminating the need for field fabrication.

Materials:
  • 29 Stocked PAC-CLAD Finishes - .050 Aluminum
  • 6 Stocked PAC-CLAD Finishes - .063 Aluminum
  • Mill Finish Aluminum - .050 & .063 Aluminum
  • Clear and Colored Anodized - .050 & .063 Aluminum
  • 14 Stocked Finishes - 22 GA Steel
    • ANSI/SPRI/FM 4435 ES-1 Standard to a design pressure of 200 lbs/ft2 to comply with the International Building Code.

    A 5-Year Workmanship Warranty is available. It covers replacement or repair of products that are defective in material or workmanship.


    See More

    Features
    • Superior, efficient design for ease of installation

    • Extensively tested for reliable, long-term performance

    • Welded corners and scuppers available (for aluminum products only)

    • Wide variety of colors and finishes

    • Pre-punched, slotted holes for precise fastener placement

    • Non-penetrating design maintains watertightness integrity

    • Reusable and recyclable material

    • Custom and radius capabilities available


    Sweets app for Revit – Learn More