1/2″ & 7/8″ Corrugated Panel
PAC-CLAD has provided the “M” and “R” exposed fastener panels in the past and has now increased its panel offerings even more. We have introduced the 7.2 Rib, the 7/8″ Corrugated Panel, the 1/2″ Corrugated Panel and additional coverage widths of the “M” and “R” Panel to the lineup. These profiles provide unmatched flexibility for use in metal roofing, wall and linear panel applications in a cost-efficient yet architecturally attractive metal panel.
PAC’s corrugated panels provided superior flexibility for use as a wall or roofing panel. For siding applications, one rib is lapped, and in roofing, two ribs are lapped. The 7/8″ panel has been tested extensively per ASTM 1592 and has excellent negative load capability even for high-wind pressures. A minimum slope of 2 1/2:12 is required for the 7/8″ Corrugated and the 1/2″ Corrugated panels in roofing applications.
The Corrugated panels can be produced perforated for a variety of exterior projects, such as equipment screens. Perforated corrugated panels are also highly suitable for interior acoustical applications as well. PAC recommends perforating aluminum in these panels, but steel panels may be used on an interior application ONLY. Contact a Petersen Aluminum representative regarding design capabilities for this product.Materials: 38 stocked colors (24 ga. steel) 15 stocked colors (22 ga. steel) 36 stocked colors (.032 aluminum) 20 stocked colors (.040 aluminum) 29 stocked colors (.050 aluminum) Galvalume Plus available
- 30-year non-prorated finish warranty
- Matching screws and rivets
- Closure Strips Available
- Precut short lengths (5’-0” minimum)
- Panel lengths up to 38’