Padded Surfaces by B&E -Finishes, Installation & Guarantee

DOWNLOADS
MF-MATERIALS, FINISHES Our Kev-Koat product consists of KEVLAR ® bullet resistant material covered with a high-build liquid vinyl. This product encapsulates the padding making the surface more durable. The high-build liquid vinyl leaves a protective, high gloss and durable top-coat. The finished...

Category: cell padding | detention equipment | padding...

MasterFormat: Wall Padding | Other Equipment | Detention Equipment...



Padded Surfaces by B&E
2339 Distributers Drive
Indianapolis, IN 46241
Tel: (888) 243-8788
Fax: (317) 248-2832

padsurf@indy.net

http://www.paddedsurfaces.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview



Finishes, Installation & Guarantee

Finishes, Installation & Guarantee

MF-MATERIALS, FINISHES

Our Kev-Koat product consists of KEVLAR®bullet resistant material covered with a high-build liquid vinyl. This product encapsulates the padding making the surface more durable. The high-build liquid vinyl leaves a protective, high gloss and durable top-coat. The finished surface resists chipping and peeling and leaves walls, floors and doors that can be easily washed and disinfected.

Waste disposal is accomplished by a flush mounted stainless steel ring that is mounted to the floor.

Finish products used by Padded Surfaces by B&E are V.O.C. compliant and U.S.D.A. approved. Our Kev-Koat product is UL listed and approved for use in the U.S. and Canada. Padded Surfaces also passes the Acute Oral Toxicity test.

Use: Our Kev-Koat product can be used in various ways:

  • Correctional Facilities
  • Psychiatric Treatment Facilities
  • Emergency Rooms
  • Primary School "Time-Out" Rooms
  • Substance Abuse Treatment Facilities Halls/Corridors with Injury Risk

AI-ASSEMBLY, INSTALLATION

Work Conditions: To ensure safe working conditions and maximum installation results, the following work conditions must be followed. We cannot be held responsible for product failure if these conditions are not met.

  • Adequate ventilation
  • Stable temperature conditions must be maintained. Temperature must be above 60 degrees Fahrenheit and maintained for the duration of the installation and continued thereafter.
  • Electrical service

Installation: Installation time varies from project to project. The following is a brief outline of the installation process.

  • Cover walls with padding
  • Cover floor with padding
  • Install "Kev-Koat" material
  • Apply liquid vinyl finish coat
  • Fabricate and install door covering
  • Install stainless steel waste ring

Once installation has been completed, a curing time of 30 days is required for guarantee of work.

CC-CODES, CERTIFICATIONS

Our Guarantee

New Installations: A padded surface installed by Padded Surfaces by B&E is guaranteed impenetrable by organic human body parts for a period of three (3) years from date of manufacturer’s installation approval for use. Should penetration occur, the damage will be repaired or the surface replaced, at the manufacturer’s option.

Repairs: A padded surface repaired by Padded Surfaces by B&E is guaranteed as above. In the case of repair of another manufacturer’s product, the guarantee applies only to the padded surfaces we install, and not the existing surfaces that remain from the initial installation.

Conditions: This guarantee does not apply to damage caused by any non-organic human body parts, nor damage resulting from use prior to completion of final curing. This product is not intended to replace established management practices, but to supplement those practices, while allowing for a greater degree of protection against client self-injury.

Padded Surfaces by B&E
2339 Distributers Drive
Indianapolis, IN 46241
Tel: (317) 243-2233
Fax: (317) 248-2832
Tollfree: (888) 243-8788
E-mail: padsurf@indy.net
Web site: http://www.paddedsurfaces.com





Sweetsstakes