Overhead Door Corporation -Rolling Steel ServiceDoors 620

DOWNLOADS


Stormtite™ 620
These rolling steel doors are an ideal choice for keeping climate-controlled air in and the elements out.


Category: steel roll-up doors | wind rated doors | wind resistant doors...

MasterFormat: Coiling Doors and Grilles | Overhead Coiling Doors | Special Function Doors...



Overhead Door Corporation
2501 South State Highway 121
Suite 200
Lewisville, TX 75067
Tel: (800) 929-3667
Fax: (972) 906-1499

info@overheaddoor.com

https://www.overheaddoor.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Rolling Steel Service Doors 620


Stormtite™ 620
These rolling steel doors are an ideal choice for keeping climate-controlled air in and the elements out. Like the Model 610, the Stormtite™ 620 offers the option of a steel, stainless steel or aluminum curtain in an array of finishes and colors. For enhanced thermal efficiency, the 620 is furnished with flat slat profiles only, as well as weatherstripping on the exterior side of the guides, on the bottom bar and a hood baffle. Additional weatherseals are available as options on the interior side of the guides and hood lintel.


Features

Standard max width
30'4" (9246 mm)

Standard max height
28'4" (8636 mm)

Curtain
16 ga. galvanized steel up to 30'4" (9246 mm) width
18 ga. galvanized steel up to 30'4" (9246 mm) width
20 ga. galvanized steel up to 25'4" (7722 mm) width
22 ga. galvanized steel up to 18'4" (5588 mm) width
24 ga. galvanized steel up to 15'4" (4674 mm) width

Finish
Gray, tan, white or brown

Hood
24 ga. galvanized steel

Wind load
20 psf

Standard mounting
Face of wall

Operation
Manual push-up up to 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)
Chain hoist over 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)

Standard springs
20,000 cycle

Weatherseals
Bottom bar astragal
Guides and hood baffle

Slat profile
Flat, non-insulated, type F-265

F-265 - available up to 30’4” (9246 mm) wide in 18 gauge. Other gauges available.
No perforation or fenestration available on F265.

F-265E - 14 gauge extruded aluminum available up to 20’4” (6198 mm) width.
No perforation or fenestration available on F265E.

Guides
Three structural steel angles PowderGuard® weathered finish with black powder coat

Bottom bar
Extruded aluminum with weatherseal up to 15'4" (4674 mm)
Back-to-back steel angles with weatherseal more than 15'4" (>4674 mm)

Lock
Interior slide bolt on push-up
Chain keeper on chain hoist

Warranty
24-month limited on door
3 year/20,000 cycles limited on door & operator system (when purchased together)


Door Options

  • Electric operator (RHX®, RSX®, RMX®) or crank operation
  • Bottom sensing edge
  • Galvanized steel bottom bar angles and guides
  • Sloping bottom bar
  • Between-jambs mounting
  • Stainless steel or aluminum slats
  • High-usage package
  • High-wind load (FBC, TDI, DADE)
  • Cylinder lock
  • Exhaust ports
  • Vision lites on 18 gau. steel slats with uniformly spaced openings of 3" x 5/8" (76 mm x 16 mm) or 10" x 1" (254 mm x 25.4 mm)
  • PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
  • PowderGuard® Zinc and PowderGuard® Weathered finishes
  • Special application doors:
    - Oversized doors to 1500 sq. ft. (139.4 sq. m)
    - Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats
    - Spark-resistant doors, craneway doors, pass doors


See More


Sweetsstakes