MultiDrain Systems, Inc. - Alfa Channel® Polymer Concrete Trench Drain

DOWNLOADS
Alfa Channel® Polymer Concrete Trench Drain

Category: facility storm water drains | facility trench drains | trench boxes...

MasterFormat: Plumbing Piping | Facility Storm Drainage | Facility Storm Drains...



MultiDrain Systems, Inc.
1405 Industrial Drive
Statesville, NC 28625
Tel: (800) 433-1119
Fax: (704) 508-1011

md.web.info1@multidrainsystems.com

http://www.multidrainsystems.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Alfa Channel® Polymer Concrete Trench Drain

Alfa Channel® is a modular, pre-cast, pre-engineered polymer concrete (PC) trench drain system that has an interior channel width of 4″. The system includes 30 sloped channel sections of 1m (3.27′) each with a built-in slope of 0.6%. The system also includes 4 additional neutral or non-sloping channels that may be inserted for additional trench length. A variety of gratings and covers provide load capabilities from pedestrian up to large aircraft and severe point loads. The system is complemented by both In-Line catch basin and 12″ x 19″ modular catch basin assemblies. The modular design of the Alfa Channel system provides true on-site adaptability and cuts down overall project costs by reducing excess materials.

NFPA CODES AND TRENCH DRAIN - Request a UL listed product

Various NFPA codes require drainage components to be made of non combustible materials. The intent of these codes are to prevent the spread of flame. Since trench are collection points of flammable liquids and heavier than air vapors, trench drains can spread fire and contribute to smoke development even when empty. All of MultiDrain Polyester Polymer Concrete products carry the UL 723 Classified mark for Class A fire rating for flame spread and smoke development.

Selecting a trench drain with the proper material properties is critical to the life cycle of the product and life safety of a buildings inhabitants. Demand a UL Classified product.

Polymer Concrete (PC) features:
Compared with Portland Cement Concrete (PCC)

  • PC trench drain resist attack for many acid and dilute alkaline materials.
  • PC Minimum compressive strength of 17,000 psi. [PCC 3,000 psi]
  • PC Minimum tensile strength of 2,000 psi. [PCC 200 psi]
  • PC Minimum Bending strength of 4,000 psi. [PCC 650 psi]
  • PC maximum moisture absorption of 0.2%. [PCC 5%]
  • PC freeze thaw cycles: 1,600 cycles — no weight loss. [PCC 750 cycles — 25% weight loss].

Polymer Concrete Channel features:

  • 4” interior channel width, 0.6% Pre-sloped, radius bottom channel.
  • A continually sloped channel run of 98’ is obtainable. A center catch basin layout effectively doubles this distance.
  • Neutral, non-sloping, channels can be inserted at 4 locations to extend the overall trench length.
  • Channel flow rates up to 380 gpm can be achieved (not including site slab slope).
  • Full length channel anchor ribs provide mechanical lock into surrounding concrete.
  • Tongue and groove butt joints at channel joints assist in channel alignment.
  • BlackDot polyethylene inserts provide fixture point for grate locking device.
  • A variety of solid end caps or end caps with outlets are available.


See More


Specifications

Alfa Channel® Polymer Concrete Trench Drain
Standard Ductile Iron Grates
Part Number: 2502
Length (in.): 19.6”
Pattern: Slotted
Material: Ductile Iron
Load Class: E
Standard Ductile Iron Grates
Assembly: 2502-AF
Length (in.): 19.6”
Pattern: Slotted
Material: Ductile Iron
Load Class: E
Standard Ductile Iron Grates
Part Number: 2504
Length (in.): 19.6”
Pattern: Slotted ADA
Material: Ductile Iron
Load Class: E
Standard Ductile Iron Grates
Assembly: 2504-AF
Length (in.): 19.6”
Pattern: Slotted ADA
Material: Ductile Iron
Load Class: E
Stamped Perforated Heel Proof Grates
Part Number: 2410 / 2411
Length (in.): 39.2” / 19.6”
Pattern: Heel Proof
Material: Galvanized Steel
Reinforcement Bars: None
Load Class: A
Stamped Perforated Heel Proof Grates
Part Number: 2452 / 2453
Length (in.): 39.2” / 19.6”
Pattern: Heel Proof
Material: Stainless Steel
Reinforcement Bars: None
Load Class: A
Stamped Perforated Heel Proof Grates
Part Number: 2486 / 2487
Length (in.): 39.2” / 19.6”
Pattern: Heel Proof
Material: Brass
Reinforcement Bars: 19
Load Class: B
Stamped Perforated Heel Proof Grates
Part Number: 2412 / 2413
Length (in.): 39.2” / 19.6”
Pattern: Heel Proof
Material: Galvanized Steel
Reinforcement Bars: 10
Load Class: C
Stamped Perforated Heel Proof Grates
Part Number:  2454 / 2455
Length (in.): 39.2” / 19.6”
Pattern: Heel Proof
Material: Stainless Steel
Reinforcement Bars: 10
Load Class: C
Stamped Perforated Heel Proof Grates
Part Number: 2454.19 / 2455.10
Length (in.): 39.2” / 19.6”
Pattern: Heel Proof
Material: Stainless Steel
Reinforcement Bars: 19
Load Class: D
Stamped Slotted Grates
Part Number: 2420 / 2421
Length (in.): 39.2” / 19.6”
Pattern: Slotted
Material: Galvanized Steel
Reinforcement Bars: None
Load Class: B
Stamped Slotted Grates
Part Number: 2440 / 2441
Length (in.): 39.2” / 19.6”
Pattern: Slotted
Material: Stainless Steel
Reinforcement Bars: None
Load Class: B
Stamped Slotted Grates
Part Number: 2422 / 2423
Length (in.): 39.2” / 19.6”
Pattern: Slotted
Material: Galvanized Steel
Reinforcement Bars: 10
Load Class: C
Stamped Slotted Grates
Part Number: 2422.19 / 2423.10
Length (in.): 39.2” / 19.6”
Pattern: Slotted
Material: Galvanized Steel
Reinforcement Bars: 19
Load Class: D
Stamped Slotted Grates
Part Number: 2442 / 2443
Length (in.): 39.2” / 19.6”
Pattern: Slotted
Material: Stainless Steel
Reinforcement Bars: 10
Load Class: C
Stamped Slotted Grates
Part Number: 2442.19 / 2443.10
Length (in.): 39.2” / 19.6”
Pattern: Slotted
Material: Stainless Steel
Reinforcement Bars: 19
Load Class: D
Solid Cover Grates
Part Number: 2404 / 2405
Length (in.): 39.2” / 19.6”
Pattern: Solid
Material: Galvanized Steel
Reinforcement Bars: None
Load Class: A
Solid Cover Grates
Part Number: 2444/ 2445
Length (in.): 39.2” / 19.6”
Pattern: Solid
Material: Stainless Steel
Reinforcement Bars: None
Load Class: A
Solid Cover Grates
Part Number: 2406 / 2407
Length (in.): 39.2” / 19.6”
Pattern: Solid  Steel Embossed
Material: Galvanized Steel
Reinforcement Bars: None
Load Class: A
Solid Cover Grates
Part Number: 2446 / 2447
Length (in.): 39.2” / 19.6”
Pattern: Solid Steel Embossed
Material:  Stainless Steel
Reinforcement Bars: None
Load Class: A
Solid Cover Grates
Part Number: 2501
Length (in.): 19.6”
Pattern: Solid
Material: Ductile Iron
Load Class: G
Decorative Ductile Iron Grates
Part Number: 2506
Length (in.): 19.6”
Pattern: Herringbone
Material: Ductile Iron
Load Class: E
Decorative Ductile Iron Grates
Assembly: 2506-AF
Length (in.): 19.6”
Pattern: Herringbone
Material: Ductile Iron
Load Class: E
Decorative Ductile Iron Grates
Part Number: 2509
Length (in.): 19.6”
Pattern: Imperial Star
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509-AF
Length (in.): 19.6”
Pattern: Imperial Star
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509A
Length (in.): 19.6”
Pattern: Maze
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509A-AF
Length (in.): 19.6”
Pattern: Maze
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509B
Length (in.): 19.6”
Pattern: River Wave
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509B-AF
Length (in.): 19.6”
Pattern: River Wave
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509C
Length (in.): 19.6”
Pattern: Incan Myth
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509C-AF
Length (in.): 19.6”
Pattern: Incan Myth
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509D
Length (in.): 19.6”
Pattern: Rain Drops
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509D-AF
Length (in.): 19.6”
Pattern: Rain Drops
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509E
Length (in.): 19.6”
Pattern: Fern
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509E-AF
Length (in.): 19.6”
Pattern: Fern
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509F
Length (in.): 19.6”
Pattern: Picasso
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509F-AF
Length (in.): 19.6”
Pattern: Picasso
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509G
Length (in.): 19.6”
Pattern: Smooth Stones
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509G-AF
Length (in.): 19.6”
Pattern: Smooth Stones
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509J
Length (in.): 19.6”
Pattern: Gears
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509J-AF
Length (in.): 19.6”
Pattern: Gears
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509L
Length (in.): 19.6”
Pattern: Ocean Current
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509L-AF
Length (in.): 19.6”
Pattern: Ocean Current
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509H
Length (in.): 19.6”
Pattern: Regular Joe “Heel Proof”
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509H-AF
Length (in.): 19.6”
Pattern: Regular Joe “Heel Proof”
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Part Number: 2509P
Length (in.): 19.6”
Pattern: Regular Joe
Material: Ductile Iron
Load Class: D
Decorative Ductile Iron Grates
Assembly: 2509P-AF
Length (in.): 19.6”
Pattern: Regular Joe
Material: Ductile Iron
Load Class: D
Heavy Duty Industrial Stainless Steel
Part Number: 2468 Grate Only
Length (in.): 19.6”
Pattern: Slotted
Material: Stainless Steel
Load Class: D
Transportation Series Grates
Part Number: 2542
Length (in.): 19.6”
Pattern: Slotted
Material: Ductile Iron
Load Class: E
Transportation Series Grates
Part Number: 2552
Length (in.): 19.6”
Pattern: Slotted
Material: Ductile Iron
Load Class: E
Transportation Series Grates
Part Number: 2564
Length (in.): 19.6”
Pattern: Herringbone
Material: Ductile Iron
Load Class: E
Transportation Series Grates
Part Number: 2532B
Length (in.): 19.6”
Pattern: Standard
Material: Ductile Iron
Load Class: G
Vinylester Chemical Resistant FRP Grates
Part Number: 2720 / 2721
Length (in.): 39.2” / 19.6”
Pattern: Bar Grate
Material: Vinylester FRP
Load Class: B
Vinylester Chemical Resistant FRP Grates
Part Number: 2722 / 2723
Length (in.): 39.2” / 19.6”
Pattern: Bar Grate
Material: Vinylester FRP
Load Class: D
Thermoplastic Grates
Part Number: 2336
Length (in.): 19.6”
Pattern: Omnidirectional ADA
Material: Thermoplastic
Load Class: A
Sweets app for Revit – Learn More