Rivetwell Boltless Steel Shelving
Rivetwell Boltless Steel Shelving
Boltless shelving is designed to maximize storage space and minimize installation set-up time.
All components are engineered to attach snugly to one another without the use of loose fasteners. This unique design has rivets which are factory attached to all left-to-right and front-to-back beams. The rivets align with keyhole slots in the vertical posts. Once tapped into place using a standard rubber mallet, the units are tightly assembled providing maximum strength.
Standard units consist of vertical angle posts at the corners, double rivet angle beams at the top and bottom perimeter and single rivet angle beams running left-to-right only at the intermediate levels. Shelves are of standard 5/8" particle board, EZ-Deck steel or wire decking and simply drop into place. Shelf strength can be increased by upgrading to heavy duty beams, adding single rivet beams running front-to-back at the intermediate levels, upgrading to double rivet beams at the full perimeter of the intermediate levels or upgrading all levels to our strongest double rivet channel beams. Optional center supports can be added using supplied hardware to increase decking capacity.
The versatility of our Rivetwell boltless shelving system allows you to mix and match components to meet your unique application. From standard storage applications, record storage to automotive tire racks, Rivetwell boltless shelving is your storage solution.
Starter units consist of:
Four standard angle posts, four left-to-right standard double rivet angle beams, four front-to-back standard double rivet angle beams, two left-to-right standard single rivet beams per intermediate level and two front-to-back standard single rivet beam at one intermediate level only (30" and 36" deep units include two front-to-back single rivet beams at each intermediate level).
Adder units consist of:
Two standard T-Posts, four left-to-right standard double rivet angle beams, two front-to-back standard double rivet angle beam, two left-to-right standard single rivet beam per intermediate level and one front-to-back standard single rivet beam at one intermediate level only (30" and 36" deep units include one front-to-back single rivet beam at each intermediate level).
Contact our Sales and Marketing department at 1-800-776-1342, by fax 954-428-3843 or e-mail Info@Hallowell-List.com. Visit our website at www.Hallowell-List.com
Standard Duty Single Rivet Section Heavy-Duty Double Rivet Section with Center Support Channels
Components / Specifications
Angle Post (Standard Duty): 1-1/2" x 1-1/2" x 14 gauge cold rolled steel corner post uprights. Perfect for standard load situations.
Angle Post (Heavy Duty): Shall be 1-7/8" x 1-7/8" x 14 gauge cold rolled steel uprights. The choice when heavy duty shelving is required. Perfect for multilevel installations.
Tee Post (Standard/Heavy Duty): 3-3/4" x 1-7/8" x 14 gauge cold rolled steel intermediate uprights. This post is used for both standard duty and heavy-duty add-on units.
Single Rivet Shelf Beam (Standard Duty): This low profile standard intermediate level shelf beam is perfect when maximum clear opening is required between shelf levels.
Single Rivet Shelf Beam (Heavy Duty): A heavy-duty version of our low profile intermediate shelf beam allowing maximum clear opening between shelf levels.
Double Rivet Angle Beam (Standard Duty): This shelf beam is essential for stability of standard units; therefore, is used on all four sides at the top and bottom levels. Can also be used front and back or on all four sides of intermediate levels to increase unit stability and load capacity.
Double Rivet Angle Beam (Heavy Duty): An upgrade to our standard duty double rivet beams, our heavy duty double rivet beams provide additional unit rigidity and even higher shelf capacity.
Double Rivet Channel Beam: Maximized left-to-right shelf capacity is achieved using our double rivet channel beams in lieu of double rivet angle beams. These beams cannot be used at the bottom level.
Center Support: Used to provide additional shelf support front-to-back by bolting between double rivet beams at pre-punched locations. Ideal for wider spans.
Double Row and Top Ties: Used to space back-to-back and top-tie rows across aisles for added stability.
Wall Ties: Used to secure units to wall and provide space between wall and unit.
Record Storage Box Supports: Used in place of particle board decking to support boxes and maintain neat organized storage.
Foot Plates: For use on anchoring posts to floor.
Post Splice: Used to extend post height. One is used per angle post. Two are used per tee post.
Tie Plate: Used for structural integrity of tee post and to join angle post units side-by-side to insure proper row alignment.
Beam Cleat: An economical way to add units. Not recommended for heavy loads.
Tire Rack Beams: For left-to-right support of tires. Inside of angle is at 30 degrees for proper tire support.
Hanger Bars: For hanging items between double rivet beams.
Deck Over Grating Supports: Provides secure support for grating when decking is required over entire installation.
Down Aisle Grating Supports: Attaches to unit between rows to provide support for grating on 2-level Rivetwell installations.
List Industries Inc.
401 NW 12th Avenue
P.O. Box 9601
Deerfield Beach, FL 33442
Tollfree: (800) 776-1342
Fax: (954) 428-3843
Web site: http://www.listindustries.com