Self-Closing Safety Gates
KEE GATE is a complete range of safety gates designed specifically to provide permanent hazard protection for internal or external applications. KEE GATE can provide permanent protection for any openings, ladder/stair access points, roof hatches and restricted areas, where regular access for maintenance & inspection is required. The gate has been specifically designed to provide a retro-fit solution to existing fixed structures where opening protection is required. The U-bolt connection allows the gate to be connected to posts from 33.7 48.3mm (1 1.5 USA version).
KEE GATE has been designed to be fully adjustable and can accommodate openings up to 1m (30 39). Connecting the KEE GATE to the supporting structure/post/stringer is simple via using the U-bolt which can provide connection around any flat, square or tubular stringer from 33.7 48.3mm (1 1.5).
KEE GATE is available in a range of high quality finishes. Galvanized: components are supplied with a galvanized finish to BS EN ISO 1461 and ASTM A53: Hot Dip Galvanized Coatings Specification and Testing Methods, giving an average coating of between 55-100 microns. Aluminum: products are supplied to Grade 6082 T6, & T4, Anodized Stainless Steel: products are supplied to Grade 316.
COMPONENT BASED SYSTEMS
All products consist of high quality tubing that seamlessly compliments Kee Safetys safety portfolio. KEE GATE mounts easily to all variants of the KEE KLAMP & KEEGUARD systems as well as Safe Access Solutions such as Mobile Access Platforms & Static Access Platforms.
The KEE GATE range has been specially designed with U-bolt clamps allowing the products to be mounted to the supporting structure/post/stringer. This permits connection around any flat, square or tubular stringer from 33.7 48.3mm (1 1.5).
TESTING & CERTIFICATION
Tested in accordance with the following (See Specification Section for full details) :-
EN 13374 Class A.
EN ISO 14122 Part 3 & Part 4
Ontario Building Code, NBC and British Columbia Building
Canadian Standards Association
Canada Occupational Health and Safety
LIFE CYCLE TESTING - BS 6375-2:2009 Clause 6.5 Opening and closing of Gate through 90 degrees.
SALT SPRAY TESTING - ASTM B117 - 11 - 55 Neutral solution over 200 hours to assess performance of coating to resist corrosion.
All Systems comply with the following:-
Work at Height Regulations.
HSG 33 Health & Safety in Roof work
HSE Construction Sheet No. 21 Working on flat roofs protection against falls.
European Union Directives together with requirements of CDM Regulations. USA & Canada.
The smooth lines of the standard galvanized finish can be further enhanced by the application of powder coating to EN 13438.
KEE GATE is available as a supply and installation service or component supply only. Products are available from Kee Safety directly or one of its licensed distributors.
100 Stradtman Street
Buffalo, NY 14206
Tel: (800) 851-5181
Fax: (716) 896-5696
Web site: http://www.keesafety.com
Kee Safety, Ltd.
40 North Rivermede, Units 6-7
Concord, Ontario L4K 2H3
Tel: +1 (877) 505-5003
Fax: +1 (905) 669-4347
Web site: http://www.keesafety.ca