Ives Door Accessory Hardware -Pin and Barrel Continuous Hinges

DOWNLOADS
Pin and Barrel Continuous Hinges

Category: continuous hinges | hinges | interior door hinges...

MasterFormat: Hardware | Door Hardware | Special Function Hardware



Ives Door Accessory Hardware
11819 N. Pennsylvania Street
Carmel, IN 46032
Tel: (888) 925-2171

ContactUs@allegion.com

http://www.Allegion.com/us

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Pin and Barrel Continuous Hinges

The steel pin and barrel continuous hinge stretches along the entire length of the frame, ensuring the door is maintained for the lifetime of the building.

Ives offers an assortment of hinges, including a variety of steel pin and barrel continuous hinges. Steel pin and barrel continuous hinges share many of the same characteristics of a traditional hinge. Both have a center pin and rolled knuckles, but a steel pin and barrel continuous hinge stretches along the entire length of the frame.

The unique design distributes the weight of the door along the entire length of the frame, reducing the high amount of stress normally associated at top of door and frame on butt hinge applications. Not only does this reduce hinge failure, it also keeps the door in constant alignment, eliminating door sag. These characteristics make continuous hinges suitable for high-use and high-traffic doors.

The design of a continuous hinge eliminates the gap between the door and the frame. The absence of gap also helps prevents fingers from being pinched, making it a safer device than traditional hinges. These benefits result in higher efficiency and less maintenance, maximizing the value of any opening investment. Ives offers both stainless steel and primed steel to best match specific applications.

Features & Benefits

Reliability

  • Come standard with nylon self-lubricating, medical grade split bearing
  • Non-handed for custom cut lengths

Aesthetics

  • A cover channel holds together two separate gear sections, providing a visually pleasing and durable solution
  • Wide selection of models that meet unique applications or style needs
  • Additional options are available for pin, tip, fastener and electrification needs

Exceeds industry standards

  • Tested and approved to be UL 10C (3hr)
  • Certified to ANSI 156.26, Grade 1
  • Limited lifetime warranty

Designs

  • Full Mortise: hinge is mounted on the door stile’s side and the inside of the frame side jamb, so only the pin and barrel is visible when the door is closed. Offering includes the following models: 600, 700, 700CS
  • Full Mortise – Full Wrap: hinge is mounted on the door stile’s side, completely wrapping around it, and the inside of the frame side jamb. Only the pin, barrel and a small portion of the hinge is visible when the door is closed. Offering includes the following models: 705
  • Full mortise – half wrap: hinge is mounted on the door stile’s side, wrapping half way around it, and the inside of the frame side jamb. Only the pin and barrel and a small portion of the hinge is visible when the door is closed. Offering includes the following models: 715, 715CS
  • Full surface: hinge is mounted on the door stile’s face and the frame side jamb face, so the entire hinge is visible when the door is closed. The pin and barrel section is located where the door stile and frame side jamb meet. Offering includes the following models: 602, 702
  • Swing clear: hinge is mounted on the door stile’s side and the frame side jamb face so the entire hinge is visible when the door is closed; the pin and barrel portion is located over the side jamb. Offering includes the following models: 611, 711, 711CS

Finishes

  • Available in two BHMA standard finishes:
    • 630 (US32D) satin stainless steel — available for 700 and 700CS Series only
    • 600 (USP) steel, primed for paint — available for 600 Series only
  • Custom finishes are also available; consult the factory

Options

Ives geared continuous hinges can be furnished with the following options:

  • Electric power transfer prep (EPT)*
  • Through wire panel (TWP); available only in CS Series hinges*
  • Electric through wire (TW8)*
  • Hospital tips
  • Security fasteners – torx
  • Wood fasteners

* Full mortise models only


See More


Sweetsstakes